| Nuno Branco 2004-01-23, 4:54 pm |
|
I am having a problem with connecting a SAN to a host over a fibre channel.
I already have one machine up and ronning with the Emulex LightPulse LP8000,
RedHat 7.3 and mounting a disk created on the SAN.
This was easy the first time, i just installed the lpfcdd driver following
instructions and when I did "insmod lpfcdd" the discs were
detected as /dev/sdb and /dev/sdc. When I try this on the new machine it
does not detect any disks but it does leave something in the
logs like:
Jul 1 10:03:09 tvprod kernel: Emulex LightPulse FC SCSI/IP 1.21g
Jul 1 10:03:09 tvprod kernel: PCI: Enabling device 03:04.0 (0116 -> 0117)
Jul 1 10:03:10 tvprod kernel: !lpfc0:1304:LKe:Link Up Event received Data:
x1 x1 x1 x0
Jul 1 10:03:13 tvprod kernel: scsi0 : HBA: Emulex LightPulse LP8000 on PCI
bus 03 device 20 irq 15
Jul 1 10:03:15 tvprod kernel: scsi: unknown type 12
Jul 1 10:03:15 tvprod kernel: Vendor: DEC Model: HSG80CCL
Rev: V85F
Jul 1 10:03:15 tvprod kernel: Type: Unknown
ANSI SCSI revision: 02
Jul 1 10:03:17 tvprod kernel: scsi: unknown type 12
It says more stuff like this, I suppose this are the hosts in the fibre
switch, unfortunately, no storage device. I was able, however, to work with
2 SDLT tapes that are in the same fibre channel.
Does anyone else had this kind of trouble?
Thanks for the help.
--
Best Regards,
Nuno Branco
|