| Alvaro Puente 2004-04-16, 4:46 am |
| Hi all!
I'm quite a newbie in administration tasks, so maybe this is a trivial
question ;-)
The fact is that I boot from cdrom to install an application on a SunFire
280R,
I'm using a laptop connected to serial port.
The installation proceeds to format the system and install system files.
Then, system is rebooted but for some reason root partition is not mounted,
and sytem is restarted again and again showing always the message below.
Do you know how can I break this endless loop?
Thanks in advance
/Alvaro
Sun Fire 280R (2 X UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 4096 MB memory installed, Serial #54144258.
Ethernet address 0:3:ba:3a:2d:2, Host ID: 833a2d02.
Rebooting with command: boot
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w2100000c50012c83,0:a
File an
d args:
SunOS Release 5.8 Version Generic_108528-27 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Cannot assemble drivers for root
/pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w2100000c5
0012c83,0:a
Cannot mount root on
/pci@8,600000/SUNW,qlc@4/fp@0,0/disk@w2100000c50012c83,0:a
fstype ufs
panic[cpu0]/thread=10408000: vfs_mountroot: cannot mount root
0000000010407970 genunix:vfs_mountroot+70 (10436400, 0, 0, 10439308, 10, 14)
%l0-3: 0000000010436400 0000000010439c60 00000000fe000000 0000000010436768
%l4-7: 0000000000000000 0000000010413890 00000000000bcf9a 0000000000000f9a
0000000010407a20 genunix:main+8c (10410218, 2000, 10407ec0, 10408030, fff2,
1005
19d0)
%l0-3: 0000000000000001 0000000000000001 0000000000000015 0000000000000f18
%l4-7: 0000000010429460 0000000010475910 00000000000d51f0 0000000000000540
skipping system dump - no dump device configured
rebooting...
Resetting ...
|