|
Home > Archive > Unix administration > February 2007 > PCI express card problem
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
PCI express card problem
|
|
| alielmali78@gmail.com 2007-02-13, 7:23 am |
| Hi,
i have a problem which is about PCI express card. i added 2 PCI
Express card in the PCI Expension Riser of system. At the bottom you
see that
i can see clearly cards via prtdiag but i can not see from cfgadm
command, i tried devfsadm, reboot -- -r many times.
do yu have any idea about what is the solution?
Regards
Ali ELMALI
root@sincap # uname -a
SunOS kuntakinte 5.9 Generic_118558-36 sun4u sparc SUNW,Sun-Fire-V245
and prtdiag output
Bus Freq Slot + Name +
Type MHz Status Path Model
------ ---- ---------- ----------------------------
--------------------
pci 188 MB pci10b9,5237.10b9.5237
(usb)
okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c
pci 188 MB pci10b9,5237.10b9.5237
(usb)
okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c,1
pci 188 MB pciclass,0c0320
(usb)
okay /pci@1e,600000/pci@0/pci@1/pci@0/usb@1c,3
pci 188 MB pci10b9,5229
(ide)
okay /pci@1e,600000/pci@0/pci@1/pci@0/ide@1f
pci 188 MB pci14e4,1668
(network)
okay /pci@1e,600000/pci@0/pci@9/pci@0/network@4
pci 188 MB pci14e4,1668
(network)
okay /pci@1e,600000/pci@0/pci@9/pci@0/
network@4,1
pci 188 MB pci14e4,1668
(network)
okay /pci@1e,600000/pci@0/pci@a/pci@0/network@4
pci 188 MB pci14e4,1668
(network)
okay /pci@1e,600000/pci@0/pci@a/pci@0/
network@4,1
pci 188 MB scsi-pci1000,50 (scsi-2) LSI,
1064
okay /pci@1e,600000/pci@0/pci@a/pci@0/pci@8/
scsi@1
pci 188 +ISER-LEFT/PCI3 SUNW,qlc-pci1077,2422 (scsi-+
QLA2460
okay /pci@1f,700000/pci@0/SUNW,qlc@2
pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
SUNW,pci-
x-qge
okay /pci@1f,700000/pci@0,2/pci@1/network@0
pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
SUNW,pci-
x-qge
okay /pci@1f,700000/pci@0,2/pci@1/network@1
pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
SUNW,pci-
x-qge
okay /pci@1f,700000/pci@0,2/pci@1/network@2
pci 188 +ISER-LEFT/PCI1 pci100b,35 (network)
SUNW,pci-
x-qge
okay /pci@1f,700000/pci@0,2/pci@1/network@3
pciex 188 +SER-RIGHT/PCI2 SUNW,qlc (scsi-fcp)
QLE2460
okay /pci@1e,600000/pci@0/pci@2/SUNW,qlc
pciex 188 +SER-RIGHT/PCI0 SUNW,qlc (scsi-fcp)
QLE2460
okay /pci@1e,600000/pci@0/pci@8/SUNW,qlc
and cfgadm result..
cfgadm -al
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured
unknown
c0::dsk/c0t0d0 CD-ROM connected configured
unknown
c1 scsi-bus connected configured
unknown
c1::dsk/c1t0d0 disk connected configured
unknown
c1::dsk/c1t1d0 disk connected configured
unknown
c2 fc connected unconfigured
unknown
| |
| Doug Freyburger 2007-02-13, 7:18 pm |
| "alielmal...@gmail.com" <alielmal...@gmail.com> wrote:
>
> i have a problem which is about PCI express card. i added 2 PCI
> Express card in the PCI Expension Riser of system. At the bottom you
> see that
> i can see clearly cards via prtdiag but i can not see from cfgadm
> command, i tried devfsadm, reboot -- -r many times.
>
> do yu have any idea about what is the solution?
> Regards
What disks are zoned to those fiber connections?
> c0 scsi-bus connected configured
> c1 scsi-bus connected configured
> c2 fc connected unconfigured
The "unconfigured" part stands out as well. Does it need a
driver updated ...
| |
| alielmali78@gmail.com 2007-02-13, 7:18 pm |
| Hi
i have no idea what should i do to solve problem, i found patch for
PCI-X and PCI Express but its FCODE version less than System FCODE
version number, i have trouble, so i could not achieve any update? did
you ever have similar problem like that? i have no idea disk zones
there is no zones at that time, my duty is that the system must see
installed PCI express and PCI-X card on the V245 sun system via
cfgadm command and zoning will be done later? but even i saw all the
cards by prtdiag i could not see them by cfgadm command. What can i
do? my customer will hang me as soon as possible i think )
Thank you very much your answer
Best Regards
Ali Elmal=C4=B1.
>
> What disks are zoned to those fiber connections?
>
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 scsi-bus =C2=A0 =C2=A0 connected =C2=A0 =C2=
=A0configured[vbcol=seagreen]
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 scsi-bus =C2=A0 =C2=A0 connected =C2=A0 =C2=
=A0configured[vbcol=seagreen]
=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 fc =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 conne=
cted =C2=A0 =C2=A0unconfigured[vbcol=seagreen]
>
> The "unconfigured" part stands out as well. =C2=A0Does it need a
> driver updated ...
|
|
|
|
|