|
Home > Archive > Red Hat Installation > April 2004 > Hard Disk
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| Hello. I've got a problem when installing Red Hat 9. At the begining of the
instalation it doesn't recognise my hard disk. It is a 120GB Seagate Serial
ATA (ST3120026AS). A list of drivers is shown but my HD isn't there. If I
choose other one then it can't go on with the instalation at the point of
partition options.
Can anyone help me please?
Bye.
| |
| William Winkler 2004-04-03, 11:36 am |
| I am including below a message from Red Hat archives, someone got a 120G
Seagate serial disk to install without any problems.
The Red Hat hardware list says
IDE controllers
ATA-133, ATA-33 -- most controllers.
If a device isn't mentioned specifically, it is usually supported under this
category. The message below also mentions that there are some serial ATA
drivers included in RH9.
Re: Serial ATA support in Linux Red Hat
----------------------------------------------------------------------------
----
From: "bobby j kirsch" <bobk71 hamiltoncom net>
To: <redhat-install-list redhat com>
Subject: Re: Serial ATA support in Linux Red Hat
Date: Fri, 9 May 2003 01:15:44 -0500
----------------------------------------------------------------------------
----
just thought i would try to help clear one up from all the things that have
helped me here.
I am running redhat 9.0 on a 120 gig seagate serial HD and it picked it up
on installation. No probs.  Hope this helps.
----- Original Message -----
From: "Jim Hayward" <jimhayward earthlink net>
To: <redhat-install-list redhat com>
Sent: Tuesday, May 06, 2003 9:06 AM
Subject: Re: Serial ATA support in Linux Red Hat
> On Tue, 2003-05-06 at 00:22, Alvaro Vives wrote:
7.3[color=darkred]
>
> None of the above versions. The RH 9 kernel contains the driver for the
> Silicon Image 3112 Serial ATA controller. However, I do not know how
> well or even if it works at all. I don't know anyone who has tried it.
> If you try it lets know if it works. ;-) It is also possible that the
> driver works, but not during installation yet.
>
> Regards,
> Jim H
"Nafai" <nafai3000@yahoo.es> wrote in message
news:hXxbc.4350293$uj6.14087168@telenews.teleline.es...
> Hello. I've got a problem when installing Red Hat 9. At the begining of
the
> instalation it doesn't recognise my hard disk. It is a 120GB Seagate
Serial
> ATA (ST3120026AS). A list of drivers is shown but my HD isn't there. If I
> choose other one then it can't go on with the instalation at the point of
> partition options.
>
> Can anyone help me please?
>
> Bye.
>
>
| |
| Tumbleweed 2004-04-04, 11:35 am |
| SATA is very poorly supported, certainly for the install. I have tried RH9,
mandrake 9.2 and SUSE 9, none of which can see my SATA disks.
Red hat enterprise 3.1 installer can see my SATA disks, due to other issues
I havent isntalled it yet. I am hoping that the new mandrake and suse due
out within a month-6 weeks will have native SATA 9 (and my controller, an
Intel ICH5). the controller seems to be the root of the issue.
--
Tumbleweed
Remove my socks for email address
"William Winkler" <ouiNOouiliSPAMouinqui@yahoo.nospam.com> wrote in message
news:c4mls7$foh$1@geraldo.cc.utexas.edu...
> I am including below a message from Red Hat archives, someone got a 120G
> Seagate serial disk to install without any problems.
>
> The Red Hat hardware list says
> IDE controllers
> ATA-133, ATA-33 -- most controllers.
> If a device isn't mentioned specifically, it is usually supported under
this
> category. The message below also mentions that there are some serial ATA
> drivers included in RH9.
>
>
> Re: Serial ATA support in Linux Red Hat
>
> --------------------------------------------------------------------------
--
> ----
>
> From: "bobby j kirsch" <bobk71 hamiltoncom net>
> To: <redhat-install-list redhat com>
> Subject: Re: Serial ATA support in Linux Red Hat
> Date: Fri, 9 May 2003 01:15:44 -0500
>
> --------------------------------------------------------------------------
--
> ----
>
> just thought i would try to help clear one up from all the things that
have
> helped me here.
>
> I am running redhat 9.0 on a 120 gig seagate serial HD and it picked it up
> on installation. No probs. Hope this helps.
> ----- Original Message -----
> From: "Jim Hayward" <jimhayward earthlink net>
> To: <redhat-install-list redhat com>
> Sent: Tuesday, May 06, 2003 9:06 AM
> Subject: Re: Serial ATA support in Linux Red Hat
>
>
> 7.3
>
>
> "Nafai" <nafai3000@yahoo.es> wrote in message
> news:hXxbc.4350293$uj6.14087168@telenews.teleline.es...
> the
> Serial
I[color=darkred]
of[color=darkred]
>
>
|
|
|
|
|