IIS FTP Server - FTP Folder error

This is Interesting: Free IT Magazines  
Home > Archive > IIS FTP Server > January 2004 > FTP Folder error





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author FTP Folder error
=?Utf-8?B?Q2hyaXM=?=

2004-01-24, 1:53 am

I have set up FTP Server on W2K Pro using IIS 5.0. When I try to log in using the web browser I always get the error FTP Folder Error An error occurred opening that folder on the FTP Srver. Make sure you have permission to access that folder. Datails:
200 type set to A
500 Invalid Port Command
500 LPRT 6,16, 0,0,0,0,0,0,0,0,0,0,0 command not understood
I have set usernames and access right. Eventhough I use the admin username, I still get the error. Need help please!

Thanks,
CP
Alexf

2004-01-24, 1:53 am

Hi.
I had the same problem.
But I had ftp port 1049.
When I changed this port to the default (21), this problem solved.

So.. Try to change the port to default.
Bernard

2004-01-24, 1:53 am

Try -
FTP Error: 500 Invalid PORT Command
http://support.microsoft.com/?id=281193

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chris" <anonymous@discussions.microsoft.com> 写入消息
news:FEE86D04-2EFF-490C-9D4C-CF4BA07B5171@microsoft.com...
quote:

> I have set up FTP Server on W2K Pro using IIS 5.0. When I try to log in

using the web browser I always get the error FTP Folder Error An error
occurred opening that folder on the FTP Srver. Make sure you have
permission to access that folder. Datails: 200 type set to A
quote:

> 500 Invalid Port Command
> 500 LPRT 6,16, 0,0,0,0,0,0,0,0,0,0,0 command not understood
> I have set usernames and access right. Eventhough I use the admin

username, I still get the error. Need help please!
quote:

>
> Thanks,
> CP



Chris

2004-01-24, 1:53 am

I did not change the port. I use the default (21).

Thanks.
quote:

>-----Original Message-----
>Hi.
>I had the same problem.
>But I had ftp port 1049.
>When I changed this port to the default (21), this

problem solved.
quote:

>
>So.. Try to change the port to default.
>.
>

Chris

2004-01-24, 1:53 am

I read the article but was not sure what the resolution=20
was. So, I did change the port to another, higher port=20
but I still got the same problem. Then I changed it back=20
to 21. I don't know what to do next. Sometimes it works=20
just a couple of hours or a day and back to the same=20
problem. Please help!

Thanks,
CP
quote:

>-----Original Message-----
>Try -
>FTP Error: 500 Invalid PORT Command
>http://support.microsoft.com/?id=3D281193
>
>--=20
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> =D0=B4=C8=EB=CF=FB=CF=A2
>news:FEE86D04-2EFF-490C-9D4C-CF4BA07B5171@microsoft.com...
When I try to log in[QUOTE][color=darkred]
>using the web browser I always get the error FTP Folder=20

Error An error
quote:

>occurred opening that folder on the FTP Srver. Make sure=20

you have
quote:

>permission to access that folder. Datails: 200 type set=20

to A
quote:

understood[QUOTE][color=darkred]
use the admin[QUOTE][color=darkred]
>username, I still get the error. Need help please!
>
>
>.
>

Bernard

2004-01-24, 1:53 am

Do you run any NAT for the server IP ?

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chris" <anonymous@discussions.microsoft.com> ????
news:023301c3cb6c$1c9af650$a401280a@phx.gbl...
I read the article but was not sure what the resolution
was. So, I did change the port to another, higher port
but I still got the same problem. Then I changed it back
to 21. I don't know what to do next. Sometimes it works
just a couple of hours or a day and back to the same
problem. Please help!

Thanks,
CP
quote:

>-----Original Message-----
>Try -
>FTP Error: 500 Invalid PORT Command
>http://support.microsoft.com/?id=281193
>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> 写入消息
>news:FEE86D04-2EFF-490C-9D4C-CF4BA07B5171@microsoft.com...
When I try to log in[QUOTE][color=darkred]
>using the web browser I always get the error FTP Folder

Error An error
quote:

>occurred opening that folder on the FTP Srver. Make sure

you have
quote:

>permission to access that folder. Datails: 200 type set

to A
quote:

understood[QUOTE][color=darkred]
use the admin[QUOTE][color=darkred]
>username, I still get the error. Need help please!
>
>
>.
>



Chris

2004-01-24, 1:53 am

My server is running W2K pro with SP4. I have setup FTP=20
server using IIS5.0 behind the NAT. My router is SMC. I=20
set up forwarded ports both TCP and UDP 20 and 21 to the=20
private IP address on that server. What I'm trying to do=20
is to get access to the FTP server using web browser not=20
the FTP client. Could you please tell me step by step=20
what I need to do to get it to work?

Chris
quote:

>-----Original Message-----
>Do you run any NAT for the server IP ?
>
>--=20
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> ????
>news:023301c3cb6c$1c9af650$a401280a@phx.gbl...
>I read the article but was not sure what the resolution
>was. So, I did change the port to another, higher port
>but I still got the same problem. Then I changed it back
>to 21. I don't know what to do next. Sometimes it works
>just a couple of hours or a day and back to the same
>problem. Please help!
>
>Thanks,
>CP
CF4BA07B5171@microsoft.com...[QUOTE][color=darkred]
>When I try to log in
>Error An error
>you have
>to A
>understood
>use the admin
>
>
>.
>

Paul Lynch

2004-01-24, 1:53 am

On Sat, 27 Dec 2003 17:59:23 -0800, "Chris"
<anonymous@discussions.microsoft.com> wrote:
quote:

>My server is running W2K pro with SP4. I have setup FTP
>server using IIS5.0 behind the NAT. My router is SMC. I
>set up forwarded ports both TCP and UDP 20 and 21 to the
>private IP address on that server. What I'm trying to do
>is to get access to the FTP server using web browser not
>the FTP client. Could you please tell me step by step
>what I need to do to get it to work?
>
>Chris


Chris,

If you are running IE5.5 or later (and your FTP setup is working
properly) then you shouldn't need to do anything at all.

IE5.5 or later supports both active and passive transfer modes. See
the FTP Clients Provided by Microsoft section of this KB article :

Information About the IIS File Transmission Protocol (FTP) Service
http://support.microsoft.com/?id=283679

And this KB article explains how to switch between those modes :

HOW TO: Configure Internet Explorer to Use Both the FTP PORT Mode and
PASV Mode in Windows 2000
http://support.microsoft.com/?id=309816


Regards,

Paul Lynch
MCSE

2004-01-24, 1:53 am

quote:

>-----Original Message-----
>On Sat, 27 Dec 2003 17:59:23 -0800, "Chris"
><anonymous@discussions.microsoft.com> wrote:
>
I[QUOTE][color=darkred]
do[QUOTE][color=darkred]
>
>Chris,
>
>If you are running IE5.5 or later (and your FTP setup is

working
quote:

>properly) then you shouldn't need to do anything at all.
>
>IE5.5 or later supports both active and passive transfer

modes. See
quote:

>the FTP Clients Provided by Microsoft section of this KB

article :
quote:

>
>Information About the IIS File Transmission Protocol

(FTP) Service
quote:

>http://support.microsoft.com/?id=283679
>
>And this KB article explains how to switch between those

modes :
quote:

>
>HOW TO: Configure Internet Explorer to Use Both the FTP

PORT Mode and
quote:

>PASV Mode in Windows 2000
>http://support.microsoft.com/?id=309816
>
>
>Regards,
>
>Paul Lynch
>MCSE
>.

Paul,
Thank you. That means I have to upgrade to IIS5.5. Is
that correct? So, you think the problem is the IIS? I
don't think the problem is Internet Explorer because
sometimes it works and sometimes it doesn't. I'm still
getting the error.

Help!
CP
Bernard

2004-01-24, 1:53 am

This is related to ftp mode and ports translation.
Now, try to setup the passive port range in your w2k.
say 5500-6000
How To Configure PassivePortRange In IIS
http://support.microsoft.com/?id=555022

open this port range in your NAT. then try to access again.

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



<anonymous@discussions.microsoft.com> ????
news:000701c3cd5d$441734d0$a301280a@phx.gbl...
quote:

>
> I
> do
> working
> modes. See
> article :
> (FTP) Service
> modes :
> PORT Mode and
> Paul,
> Thank you. That means I have to upgrade to IIS5.5. Is
> that correct? So, you think the problem is the IIS? I
> don't think the problem is Internet Explorer because
> sometimes it works and sometimes it doesn't. I'm still
> getting the error.
>
> Help!
> CP



Paul Lynch

2004-01-24, 1:53 am

On Sun, 28 Dec 2003 08:11:35 -0800,
<anonymous@discussions.microsoft.com> wrote:
quote:

>Paul,
>Thank you. That means I have to upgrade to IIS5.5. Is
>that correct? So, you think the problem is the IIS? I
>don't think the problem is Internet Explorer because
>sometimes it works and sometimes it doesn't. I'm still
>getting the error.
>
>Help!
>CP


Chris,

No. There is no IIS5.5. The article states that only IE5.5 (Internet
Explorer) and later support both modes of transfer.

Versions prior to IE5.5 only support passive mode. You have only
opened up ports 20 and 21 on your router which will allow only
clients using active mode to connect. If you want to connect using a
browser you need to be using a browser that supports active mode -
IE5.5 or later.


Regards,

Paul Lynch
MCSE
Chris

2004-01-24, 1:53 am

quote:

>-----Original Message-----
>On Sun, 28 Dec 2003 08:11:35 -0800,
><anonymous@discussions.microsoft.com> wrote:
>
>
>Chris,
>
>No. There is no IIS5.5. The article states that only

IE5.5 (Internet
quote:

>Explorer) and later support both modes of transfer.
>
>Versions prior to IE5.5 only support passive mode. You

have only
quote:

>opened up ports 20 and 21 on your router which will allow

only
quote:

>clients using active mode to connect. If you want to

connect using a
quote:

>browser you need to be using a browser that supports

active mode -
quote:

>IE5.5 or later.
>
>
>Regards,
>
>Paul Lynch
>MCSE
>.
>

Paul,
Thank you. I use IE 6.0. That shouldn't be the problem.

CP
Chris

2004-01-24, 1:53 am

Bernard,
It works. Thank you very much. I will post back later
because sometimes it works and sometimes it doesn't for a
while.

Thanks,
CP
quote:

>-----Original Message-----
>This is related to ftp mode and ports translation.
>Now, try to setup the passive port range in your w2k.
>say 5500-6000
>How To Configure PassivePortRange In IIS
>http://support.microsoft.com/?id=555022
>
>open this port range in your NAT. then try to access

again.
quote:

>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
><anonymous@discussions.microsoft.com> ????
>news:000701c3cd5d$441734d0$a301280a@phx.gbl...
FTP[QUOTE][color=darkred]
the[QUOTE][color=darkred]
not[QUOTE][color=darkred]
is[QUOTE][color=darkred]
all.[QUOTE][color=darkred]
transfer[QUOTE][color=darkred]
KB[QUOTE][color=darkred]
those[QUOTE][color=darkred]
>
>
>.
>

Chris

2004-01-24, 1:53 am

Bernard,
It works but I got another error problem this time. When
I tried to copy some files TO the server or create
directory ON the server I got an error 200 type set to I,
200 port command successful, 550 "file name" Access is
denied. I was able to do it before. Any suggestion would
be appreciated.

Thanks,
CP

quote:

>-----Original Message-----
>This is related to ftp mode and ports translation.
>Now, try to setup the passive port range in your w2k.
>say 5500-6000
>How To Configure PassivePortRange In IIS
>http://support.microsoft.com/?id=555022
>
>open this port range in your NAT. then try to access

again.
quote:

>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
><anonymous@discussions.microsoft.com> ????
>news:000701c3cd5d$441734d0$a301280a@phx.gbl...
FTP[QUOTE][color=darkred]
the[QUOTE][color=darkred]
not[QUOTE][color=darkred]
is[QUOTE][color=darkred]
all.[QUOTE][color=darkred]
transfer[QUOTE][color=darkred]
KB[QUOTE][color=darkred]
those[QUOTE][color=darkred]
>
>
>.
>

Bernard

2004-01-24, 1:53 am

Make sure you have permission on the newly created folder. Verify the ftp
log and NTFS permission again.

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chris" <anonymous@discussions.microsoft.com> ????
news:0a6601c3ce76$7fae7bb0$a001280a@phx.gbl...[QUOTE][color=darkred]
> Bernard,
> It works but I got another error problem this time. When
> I tried to copy some files TO the server or create
> directory ON the server I got an error 200 type set to I,
> 200 port command successful, 550 "file name" Access is
> denied. I was able to do it before. Any suggestion would
> be appreciated.
>
> Thanks,
> CP
>
>
> again.
> FTP
> the
> not
> is
> all.
> transfer
> KB
> those


Chris

2004-01-24, 1:53 am

It comes back again. It worked just a day. Now, I'm
getting the same login error message. Please help me.

Thanks,
CP
quote:

>-----Original Message-----
>Make sure you have permission on the newly created

folder. Verify the ftp
quote:

>log and NTFS permission again.
>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> ????
>news:0a6601c3ce76$7fae7bb0$a001280a@phx.gbl...
When[QUOTE][color=darkred]
I,[QUOTE][color=darkred]
would[QUOTE][color=darkred]
setup[QUOTE][color=darkred]
SMC.[QUOTE][color=darkred]
to[QUOTE][color=darkred]
trying to[QUOTE][color=darkred]
browser[QUOTE][color=darkred]
step[QUOTE][color=darkred]
setup[QUOTE][color=darkred]
this[QUOTE][color=darkred]
FTP[QUOTE][color=darkred]
Is[QUOTE][color=darkred]
IIS? I[QUOTE][color=darkred]
still[QUOTE][color=darkred]
>
>
>.
>

Bernard

2004-01-24, 1:53 am

which error ? the access denied ? or invalid port command ?

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chris" <anonymous@discussions.microsoft.com> ????
news:065e01c3cefd$987db9d0$a001280a@phx.gbl...[QUOTE][color=darkred]
> It comes back again. It worked just a day. Now, I'm
> getting the same login error message. Please help me.
>
> Thanks,
> CP
> folder. Verify the ftp
> When
> I,
> would
> setup
> SMC.
> to
> trying to
> browser
> step
> setup
> this
> FTP
> Is
> IIS? I
> still


Chris

2004-01-24, 1:53 am

The invalid port command.
quote:

>-----Original Message-----
>which error ? the access denied ? or invalid port

command ?
quote:

>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> ????
>news:065e01c3cefd$987db9d0$a001280a@phx.gbl...
to[QUOTE][color=darkred]
is[QUOTE][color=darkred]
w2k.[QUOTE][color=darkred]
is[QUOTE][color=darkred]
21[QUOTE][color=darkred]
by[QUOTE][color=darkred]
at[QUOTE][color=darkred]
Protocol[QUOTE][color=darkred]
between[QUOTE][color=darkred]
the[QUOTE][color=darkred]
IIS5.5.[QUOTE][color=darkred]
because[QUOTE][color=darkred]
>
>
>.
>

Bernard

2004-01-24, 1:53 am

Now, try this
http://www.microsoft.com/technet/pr..._ftpservice.asp

Set EnablePortAttack's value to 1, restart IIS Services.

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chris" <anonymous@discussions.microsoft.com> ????
news:006c01c3d59c$fd0f2af0$a001280a@phx.gbl...[QUOTE][color=darkred]
> The invalid port command.
>
> command ?
> to
> is
> w2k.
> is
> 21
> by
> at
> Protocol
> between
> the
> IIS5.5.
> because


Chirs

2004-01-24, 1:53 am

Bernard,
Thank you. It is working now by following your advise.
Let's keep watching for a couple of days and I will post
the result.

Thanks again,
CP
quote:

>-----Original Message-----
>Now, try this
>http://www.microsoft.com/technet/pr...l/windowsserver

2003/proddocs/standard/ref_reg_ftpservice.asp
quote:

>
>Set EnablePortAttack's value to 1, restart IIS Services.
>
>--
>Regards,
>Bernard Cheah
>http://support.microsoft.com/
>Please respond to newsgroups only ...
>
>
>
>"Chris" <anonymous@discussions.microsoft.com> ????
>news:006c01c3d59c$fd0f2af0$a001280a@phx.gbl...
me.[QUOTE][color=darkred]
time.[QUOTE][color=darkred]
set[QUOTE][color=darkred]
Access[QUOTE][color=darkred]
suggestion[QUOTE][color=darkred]
translation.[QUOTE][color=darkred]
access[QUOTE][color=darkred]
have[QUOTE][color=darkred]
router[QUOTE][color=darkred]
and[QUOTE][color=darkred]
step[QUOTE][color=darkred]
FTP[QUOTE][color=darkred]
anything[QUOTE][color=darkred]
passive[QUOTE][color=darkred]
of[QUOTE][color=darkred]
Both[QUOTE][color=darkred]
I'm[QUOTE][color=darkred]
>
>
>.
>

Bernard

2004-01-24, 1:53 am

Sure.. update us on the outcome.

--
Regards,
Bernard Cheah
http://support.microsoft.com/
Please respond to newsgroups only ...



"Chirs" <anonymous@discussions.microsoft.com> ????
news:0d9d01c3d658$70a16f80$a001280a@phx.gbl...[QUOTE][color=darkred]
> Bernard,
> Thank you. It is working now by following your advise.
> Let's keep watching for a couple of days and I will post
> the result.
>
> Thanks again,
> CP
> 2003/proddocs/standard/ref_reg_ftpservice.asp
> me.
> time.
> set
> Access
> suggestion
> translation.
> access
> have
> router
> and
> step
> FTP
> anything
> passive
> of
> Both
> I'm


Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com