|
Home > Archive > IIS FTP Server > October 2004 > How to tell the FTP server software the external IP ?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
How to tell the FTP server software the external IP ?
|
|
|
| I have a FTP server in Windows 2003 Standard, behind a router/NAT (SMC
7004ABR). This router is not able to translate the local IP address inside
the answer to PASV command, to the external IP address used to connect the
Internet.
(see http://www.gbnetwork.co.uk/smcftpd/ )
How can I tell the FTP server software, to use the external IP address
instead of the local IP ?
Thanks,
Elga.
| |
| Bernard 2004-10-25, 2:47 am |
| This is the way how NAT was implementated. for your case, just ensure you
have configure proper ports routing and etc. To setup passive port range -
try
How To Configure PassivePortRange In IIS
http://support.microsoft.com/?id=555022
--
Regards,
Bernard Cheah
http://www.tryiis.com/
http://support.microsoft.com/
http://www.msmvps.com/bernard/
"Elga" <Elga@discussions.microsoft.com> wrote in message
news:F77C14BC-D39E-4584-9D01-AFA55A71140F@microsoft.com...
> I have a FTP server in Windows 2003 Standard, behind a router/NAT (SMC
> 7004ABR). This router is not able to translate the local IP address inside
> the answer to PASV command, to the external IP address used to connect the
> Internet.
> (see http://www.gbnetwork.co.uk/smcftpd/ )
>
> How can I tell the FTP server software, to use the external IP address
> instead of the local IP ?
>
> Thanks,
>
> Elga.
|
|
|
|
|