|
Home > Archive > IIS Server Security > September 2004 > SSL Cert - DNS ERROR
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
SSL Cert - DNS ERROR
|
|
| Steve Santos 2004-09-22, 9:26 pm |
| I have installed an SSL Certificate on a Windows 2000 Server.
On the Default Web Site properties I add port 443 to the SSL Port but did
not require SSL for the etinre site.
On a sub folder I set Secure Communications to require SSL.
When attempting to connect to a web page on the sub folder with "http" I do
get the error message that "The page must be viewed over a secure channel"
HTTP 403.4 error message, that is good.
When I attemp to connect using "https" I get "The page you are looking for
is currently unavailable." page and at the botton of the page it reads
"Cannot find server or DNS Error - Internet Explorer"
If I remove SSL required I can connect to the page using "http".
Any advice to steer me in the right direction is apprciated.
Thanks,
Steve Santos
ssantos@csuchico.edu
| |
| Miha Pihler 2004-09-22, 9:26 pm |
| Hi Steve,
Run this tool on your server. It should tell you if there are any
configuration or certificate problems that you need to resolve.
SSL Diagnostics Version 1.0 (x86)
http://www.microsoft.com/downloads/...&DisplayLang=en
Mike
"Steve Santos" <ssantos@csuchico.edu> wrote in message
news:JgF3d.23642$di6.12480@newssvr29.news.prodigy.com...
> I have installed an SSL Certificate on a Windows 2000 Server.
>
> On the Default Web Site properties I add port 443 to the SSL Port but did
> not require SSL for the etinre site.
>
> On a sub folder I set Secure Communications to require SSL.
>
> When attempting to connect to a web page on the sub folder with "http" I
do
> get the error message that "The page must be viewed over a secure channel"
> HTTP 403.4 error message, that is good.
>
> When I attemp to connect using "https" I get "The page you are looking for
> is currently unavailable." page and at the botton of the page it reads
> "Cannot find server or DNS Error - Internet Explorer"
>
> If I remove SSL required I can connect to the page using "http".
>
> Any advice to steer me in the right direction is apprciated.
>
> Thanks,
>
> Steve Santos
> ssantos@csuchico.edu
>
>
| |
| Steve Santos 2004-09-22, 9:26 pm |
| Yes, I did run SSL Diags but have been unable to track down the mesage:
"#WARNING:Connecting to server: 0x274d (10061) " error that I get in several
areas.
The only different from the one above is in the ServerState:
"#WARNING:Incorrect SecureBindings"
Trying to track that down also.
--Steve
"Miha Pihler" <mihap-news@atlantis.si> wrote in message
news:eHIbaM1nEHA.2024@TK2MSFTNGP09.phx.gbl...
> Hi Steve,
>
> Run this tool on your server. It should tell you if there are any
> configuration or certificate problems that you need to resolve.
>
> SSL Diagnostics Version 1.0 (x86)
>
http://www.microsoft.com/downloads/...&DisplayLang=en
>
> Mike
>
> "Steve Santos" <ssantos@csuchico.edu> wrote in message
> news:JgF3d.23642$di6.12480@newssvr29.news.prodigy.com...
did[vbcol=seagreen]
> do
channel"[vbcol=seagreen]
for[vbcol=seagreen]
>
>
| |
| Bernard 2004-09-22, 9:26 pm |
| check the ssl port binding again.. is it 443 ?
try
PRB: Error "Page Cannot Be Displayed" When You Connect Through HTTPS
http://support.microsoft.com/?id=290391
HOW TO: Determine If SSL Connectivity Is Not Working on the Web Server or on
an Intermediate Device
http://support.microsoft.com/?id=290051
"Cannot find server" or "DNS" Errors When Using SSL (Q & A)
http://support.microsoft.com/?id=292296
at command prompt, enter
"netstat -an", see anything binding on port 443 ?
anything in event log ?
--
Regards,
Bernard Cheah
http://www.tryiis.com/
http://support.microsoft.com/
http://www.msmvps.com/bernard/
"Steve Santos" <ssantos@csuchico.edu> wrote in message
news:H5L3d.23796$fH.12372@newssvr29.news.prodigy.com...
> Yes, I did run SSL Diags but have been unable to track down the mesage:
> "#WARNING:Connecting to server: 0x274d (10061) " error that I get in
several
> areas.
>
> The only different from the one above is in the ServerState:
> "#WARNING:Incorrect SecureBindings"
>
> Trying to track that down also.
>
> --Steve
>
>
>
> "Miha Pihler" <mihap-news@atlantis.si> wrote in message
> news:eHIbaM1nEHA.2024@TK2MSFTNGP09.phx.gbl...
>
http://www.microsoft.com/downloads/...&DisplayLang=en
> did
I[vbcol=seagreen]
> channel"
> for
>
>
|
|
|
|
|