|
Home > Archive > Radius Server > April 2005 > IAS and AD
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Adam Baum 2004-02-09, 5:35 am |
| I have a W2K domain/forest running RADIUS. Clients are authenticated to an
NT4 domain. A trust exists between the two domains. We are replacing our
NT4 with Windows 2003. Are there any gotchas I need to watch for? I am
guessing that as long as I maintian the trusts, things should go smoothly,
correct?
adam
| |
| Sam Salhi [MSFT] 2004-02-09, 6:36 am |
| Correct,
It's highly recommended that you move the IAS server to the Win2k3 domain,
since it's more secure and have it authenticate Win2k through trust between
the domains
This is the best way to do multi domain authentication
--
========================================
===================
This posting is provided "AS IS" with no warranties and confers no rights
========================================
===================
"Adam Baum" <dont@gothere.now> wrote in message
news:eEFAClz7DHA.2832@tk2msftngp13.phx.gbl...
> I have a W2K domain/forest running RADIUS. Clients are authenticated to
an
> NT4 domain. A trust exists between the two domains. We are replacing our
> NT4 with Windows 2003. Are there any gotchas I need to watch for? I am
> guessing that as long as I maintian the trusts, things should go smoothly,
> correct?
>
> adam
>
>
| |
| Michael 2005-04-22, 6:00 pm |
| Hey Everyone,
I found a tutorial online so I set up an AD with IAS and Regiestered
the IAS in the AD. However when I look at the logs or event viewer I see no
entries for IAS. There are plenty in there for AD. Yes i have checked
services to make sure it was started. I also checked in the
C:/Windows/System32/LogFiles directory there is nothing there either. I also
went into IAS mc and check to make sure I had logging on, and it is anyone
got any Ideas why i am not seeing any logs generated from IAS?
Thanks,
--
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
| |
| Manjunath Bharadwaj [MSFT] 2005-04-22, 6:00 pm |
| Michael,
Did you run "netsh ras set tracing * enable"??
Thanks, Manju
++++++++++++++++++++++++++++++++++++++++
+++++++
This posting is provided "AS IS" with no warranties, and confers no rights
"Michael" <texastaz@trlracing.org> wrote in message
news:picae.18786$AE6.3264@tornado.texas.rr.com...
> Hey Everyone,
>
> I found a tutorial online so I set up an AD with IAS and
> Regiestered the IAS in the AD. However when I look at the logs or event
> viewer I see no entries for IAS. There are plenty in there for AD. Yes i
> have checked services to make sure it was started. I also checked in the
> C:/Windows/System32/LogFiles directory there is nothing there either. I
> also went into IAS mc and check to make sure I had logging on, and it is
> anyone got any Ideas why i am not seeing any logs generated from IAS?
>
> Thanks,
> --
> Michael A Cooper
> BCCISP.net
> http://www.bccisp.net
> 281-854-2079
> "Technology that counts, voices that matter!"
>
| |
| Manjunath Bharadwaj [MSFT] 2005-04-22, 6:00 pm |
| Once you set up tracing (as in my mail from a couple of min ago), look at
the c:\WINDOWS\Tracing and the trace files there might give you a hint if
something is wrong.. You can copy paste trace files so we can see if there
is something wrong.
Thanks, Manju
--
++++++++++++++++++++++++++++++++++++++++
+++++++
This posting is provided "AS IS" with no warranties, and confers no rights
"Michael" <texastaz@trlracing.org> wrote in message
news:picae.18786$AE6.3264@tornado.texas.rr.com...
> Hey Everyone,
>
> I found a tutorial online so I set up an AD with IAS and
> Regiestered the IAS in the AD. However when I look at the logs or event
> viewer I see no entries for IAS. There are plenty in there for AD. Yes i
> have checked services to make sure it was started. I also checked in the
> C:/Windows/System32/LogFiles directory there is nothing there either. I
> also went into IAS mc and check to make sure I had logging on, and it is
> anyone got any Ideas why i am not seeing any logs generated from IAS?
>
> Thanks,
> --
> Michael A Cooper
> BCCISP.net
> http://www.bccisp.net
> 281-854-2079
> "Technology that counts, voices that matter!"
>
| |
| Michael 2005-04-28, 2:48 am |
| Thanks Manju,
I will do that and see what comes of it. I will keep ya posted.
Thanks Again
--
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
"Manjunath Bharadwaj [MSFT]" <mbhara@online.microsoft.com> wrote in message
news:eTx1Xb3RFHA.3712@TK2MSFTNGP10.phx.gbl...
> Once you set up tracing (as in my mail from a couple of min ago), look at
> the c:\WINDOWS\Tracing and the trace files there might give you a hint if
> something is wrong.. You can copy paste trace files so we can see if there
> is something wrong.
>
> Thanks, Manju
>
> --
> ++++++++++++++++++++++++++++++++++++++++
+++++++
> This posting is provided "AS IS" with no warranties, and confers no rights
>
>
> "Michael" <texastaz@trlracing.org> wrote in message
> news:picae.18786$AE6.3264@tornado.texas.rr.com...
>
>
| |
| Michael 2005-04-28, 2:48 am |
| Hey Manju
I tried that command and it didn't work so I am researching to find what
to run to get it to work properly. I will keep ya posted.
See ya
--
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
"Manjunath Bharadwaj [MSFT]" <mbhara@online.microsoft.com> wrote in message
news:eTx1Xb3RFHA.3712@TK2MSFTNGP10.phx.gbl...
> Once you set up tracing (as in my mail from a couple of min ago), look at
> the c:\WINDOWS\Tracing and the trace files there might give you a hint if
> something is wrong.. You can copy paste trace files so we can see if there
> is something wrong.
>
> Thanks, Manju
>
> --
> ++++++++++++++++++++++++++++++++++++++++
+++++++
> This posting is provided "AS IS" with no warranties, and confers no rights
>
>
> "Michael" <texastaz@trlracing.org> wrote in message
> news:picae.18786$AE6.3264@tornado.texas.rr.com...
>
>
| |
| Manjunath Bharadwaj [MSFT] 2005-04-28, 2:48 am |
| Michael
Can you tell me what error message you got when you ran "netsh ras set
tracing * enable"? If it did not give any error message, that means tracing
is turned on. Now when you send a radius request, you should see the
logfiles in c:\WINDOWS\Tracing. Let me know what you find.
Thanks, Manju
--
++++++++++++++++++++++++++++++++++++++++
+++++++
This posting is provided "AS IS" with no warranties, and confers no rights
"Michael" <mcooper@bccisp.net> wrote in message
news:LOYbe.30203$AE6.1049@tornado.texas.rr.com...
> Hey Manju
>
> I tried that command and it didn't work so I am researching to find
> what to run to get it to work properly. I will keep ya posted.
>
> See ya
> --
> Michael A Cooper
> BCCISP.net
> http://www.bccisp.net
> 281-854-2079
> "Technology that counts, voices that matter!"
|
|
|
|
|