|
| Authentication: I have all three methods of
authentication turned on.
Connection: All except list below - nothing in list
Relay Restrictions: Only the list below - which has the
IPs; allow all computers which succesfully authenticate to
relay is Checked.
Now I remember the problems I ran into:
All smtp traffic (port 25) was blocked between the allowed
IP's and the email server (someone installed a firewall
and blocked port 25 in order to combat worms and
zombies). This doesn't sound related to your problem -
although you might want to make sure you can telnet to
port 25 on your mail server from inside your network.
The large IP ranges didn't seem to work - although I can't
recall confirming the problem. I replaced the large
ranges with a bunch of small blocks: x.x.x.1
(255.255.255.0) Then I rebooted and then everything
worked properly.
Hope this helps.
Joe
btw- exchange's Queue management might be worth the
switch, but I'm sure you'll need to solve this problem
first.
>Sent: Friday, August 20, 2004 12:51 PM
>Subject: SMTP Auth Help
>I tried rebooting the server, and that didn't seem to fix
>it. The server is running windows server 2003 enterprise
>edition. It is also behind the firewall. Do I need to put
>it in the DMZ for this to work properly? If I do, I'm
>just going to go ahead and get another computer and put
>Exchange on it. Thanks for the help.
>-----Original Message-----
>It must be possible - I've had 4 Exchange 2000 servers
set
>up this way for years.
>
>I seem to remember the problem you are having. I believe
>those IP addresses that you are allowing will only take
>effect after a reboot. If that doesn't work for you,
>email me and I will connect to my server and poke around.
>
>
possible[vbcol=seagreen]
and[vbcol=seagreen]
authorization?[vbcol=seagreen]
>.
>
|
|