|
Home > Archive > BizTalk Server General > July 2004 > Error during configuration of BizTalk Server 2004 Developer Edition
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Error during configuration of BizTalk Server 2004 Developer Edition
|
|
| Klaus Aschenbrenner 2004-03-20, 9:23 pm |
| Hi!
During the configuration of BizTalk Server I get the following error
message:
Error encountered while querying virtual server state for URL:
http://WIN2003-DEV/sites/BASSite
Error Detail: Could not load type 'System.Int32' from assembly 'mscorlib,
Version=1.2.3400.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
I've installed .NET Framework 1.1 and the PDC Build of .NET Framework 1.2.
The whole IIS is configured for .NET Framework 1.1.
Any suggestions?
Klaus Aschenbrenner
www.csharp.at
http://weblogs.asp.net/klaus.aschenbrenner
| |
| Tomas Restrepo \(MVP\) 2004-03-20, 9:23 pm |
| Hi Klaus,
> During the configuration of BizTalk Server I get the following error
> message:
>
> Error encountered while querying virtual server state for URL:
> http://WIN2003-DEV/sites/BASSite
> Error Detail: Could not load type 'System.Int32' from assembly 'mscorlib,
> Version=1.2.3400.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
>
> I've installed .NET Framework 1.1 and the PDC Build of .NET Framework 1.2.
> The whole IIS is configured for .NET Framework 1.1.
>
> Any suggestions?
Go to your BizTalk installation folder, and create a new file called
"ConfigFramework.exe.config", and put the following lines in it:
| |
| Tomas Restrepo \(MVP\) 2004-03-20, 9:23 pm |
| Hi Klaus,
> During the configuration of BizTalk Server I get the following error
> message:
>
> Error encountered while querying virtual server state for URL:
> http://WIN2003-DEV/sites/BASSite
> Error Detail: Could not load type 'System.Int32' from assembly 'mscorlib,
> Version=1.2.3400.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
>
> I've installed .NET Framework 1.1 and the PDC Build of .NET Framework 1.2.
> The whole IIS is configured for .NET Framework 1.1.
>
> Any suggestions?
Go to your BizTalk installation folder, and create a new file called
"ConfigFramework.exe.config", and put the following lines in it:
<configuration>
<startup>
<requiredRuntime version="v1.1.4322" safemode="true" />
</startup>
</configuration>
Then run the Config Framework tool again.
--
Tomas Restrepo
tomasr@mvps.org
| |
| Klaus Aschenbrenner 2004-03-21, 10:35 am |
| Hi Tomas!
Yes, that was the problem: But now I get the following error message during
the configuration process:
"Error 157432804 occurred configuring feature ConfigFramework"
According to the event log the service "BizTalk Sharepoint Messaging
Adapter" couldn't be started:
"The BizTalk Sharepoint Messaging Adapter service failed to start due to the
following error:
The service did not respond to the start or control request in a timely
fashion."
Any suggestions?
Thanks
Klaus Aschenbrenner
www.csharp.at
http://weblogs.asp.net/klaus.aschenbrenner
"Tomas Restrepo (MVP)" <tomasr@mvps.org> wrote in message
news:uJ2og6tDEHA.3788@TK2MSFTNGP10.phx.gbl...
> Hi Klaus,
'mscorlib,[color=darkred]
1.2.[color=darkred]
>
> Go to your BizTalk installation folder, and create a new file called
> "ConfigFramework.exe.config", and put the following lines in it:
>
> <configuration>
> <startup>
> <requiredRuntime version="v1.1.4322" safemode="true" />
> </startup>
> </configuration>
>
> Then run the Config Framework tool again.
>
> --
> Tomas Restrepo
> tomasr@mvps.org
>
>
| |
| Tomas Restrepo \(MVP\) 2004-03-21, 11:36 am |
| Hi Klaus,
> Yes, that was the problem: But now I get the following error message
during
> the configuration process:
>
> "Error 157432804 occurred configuring feature ConfigFramework"
>
> According to the event log the service "BizTalk Sharepoint Messaging
> Adapter" couldn't be started:
>
> "The BizTalk Sharepoint Messaging Adapter service failed to start due to
the
> following error:
> The service did not respond to the start or control request in a timely
> fashion."
>
> Any suggestions?
OK, that one definitely didn't happen to me.... Is there any other related
entry on the event log?
--
Tomas Restrepo
tomasr@mvps.org
| |
| Klaus Aschenbrenner 2004-03-21, 12:36 pm |
| Hi Tomas!
No there are no other entries in the event log. Here's the relevant excerpt
from the configuration log file:
[18:23:30 Info ConfigHelper] Granted 'Logon as Service' permission to
account: WIN2003-DEV\administrator
[18:23:30 Info ConfigHelper] Set property: RunForever on COM+ application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:30 Info ConfigHelper] Set property: ApplicationDirectory on COM+
application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:31 Info ConfigHelper] Added user: WIN2003-DEV\administrator to role:
SenderToSts on COM+ application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:31 Info ConfigHelper] Added user: win2003-dev\Administrator to role:
SenderToBizTalk on COM+ application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:31 Info ConfigHelper] Added user: WIN2003-DEV\BizTalk BAS Web
Services Group to role: GetConfigInfo on COM+ application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:31 Info ConfigHelper] Added user: win2003-dev\Administrator to role:
GetConfigInfo on COM+ application:
Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
[18:23:31 Info CMsgAdaCfg] Leaving function:
CMsgAdaCfg::CreateNTServiceForComPlusApp
[18:23:32 Info CMsgAdaCfg] Leaving function: CMsgAdaCfg::ChangeServiceName
[18:23:33 Error CMsgAdaCfg] Could not start service
[18:23:33 Error MsgAdaCfg]
c:\depot4000\jupiter\source\private\kw\s
ource\bizoffice\code\bizofficeconfig
uration\msgadacfg\msgadacfghelper.cpp(1990): FAILED hr = 8007041d
[18:23:33 Info CMsgAdaCfg] Leaving function: CMsgAdaCfg::StartStopNTService
[18:23:33 Error MsgAdaCfg]
c:\depot4000\jupiter\source\private\kw\s
ource\bizoffice\code\bizofficeconfig
uration\msgadacfg\msgadacfghelper.cpp(878): FAILED hr = 8007041d
[18:23:33 Info CMsgAdaCfg] Leaving function:
CMsgAdaCfg::RegBizTalkAdapterAsNTService
[18:23:33 Error MsgAdaCfg]
c:\depot4000\jupiter\source\private\kw\s
ource\bizoffice\code\bizofficeconfig
uration\msgadacfg\msgadacfg.cpp(587): FAILED hr = 8007041d
[18:23:33 Info CMsgAdaCfg] Leaving function: CMsgAdaCfg::ConfigureFeature
[18:23:33 Info ConfigFramework] Showing MessageBox with text: Error
157482188 occurred configuring feature ConfigFramework Return Code: 2
[18:23:33 Error ConfigFramework]
c:\depot4000\jupiter\source\private\comm
on\configwizard\exe\configthread.cpp
(556): FAILED hr = 8007041d
Klaus Aschenbrenner
www.csharp.at
http://weblogs.asp.net/klaus.aschenbrenner
"Tomas Restrepo (MVP)" <tomasr@mvps.org> wrote in message
news:uicUs#1DEHA.2088@TK2MSFTNGP10.phx.gbl...
> Hi Klaus,
>
> during
> the
>
> OK, that one definitely didn't happen to me.... Is there any other related
> entry on the event log?
>
> --
> Tomas Restrepo
> tomasr@mvps.org
>
>
| |
| Karthik Bhaskar [MSFT] 2004-07-09, 3:31 pm |
| Hi,
Sharepoint RTM version does not support Whidbey installs.
This is the reason the error message is weird too.
PD5 also takes over the virtual server where you have extended the
sharepoint
virtual server. Try uninstalling Whidbey and it should get you running
again, unless Whidbey PD5 does not completely uninstall.
- Karthik [MSFT]
--------------------
| >>From: "Klaus Aschenbrenner" <Klaus.Aschenbrenner@techtalk.at>
| >>References: <OuS2EJrDEHA.1744@TK2MSFTNGP09.phx.gbl>
<uJ2og6tDEHA.3788@TK2MSFTNGP10.phx.gbl>
<elKX6Q1DEHA.3748@TK2MSFTNGP11.phx.gbl>
<uicUs#1DEHA.2088@TK2MSFTNGP10.phx.gbl>
| >>Subject: Re: Error during configuration of BizTalk Server 2004
Developer Edition
| >>Date: Sun, 21 Mar 2004 18:29:38 +0100
| >>Lines: 85
| >>X-Priority: 3
| >>X-MSMail-Priority: Normal
| >>X-Newsreader: Microsoft Outlook Express 6.00.3790.0
| >>X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| >>Message-ID: <#xolUo2DEHA.3256@TK2MSFTNGP09.phx.gbl>
| >>Newsgroups:
microsoft.public.biztalk.general,microsoft.public.biztalk.server,microsoft.p
ublic.biztalk.setup
| >>NNTP-Posting-Host: chello080108069054.11.11.vie.surfer.at 80.108.69.54
| >>Path: cpmsftngxa06.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP09.phx.gbl
| >>Xref: cpmsftngxa06.phx.gbl microsoft.public.biztalk.server:9126
microsoft.public.biztalk.setup:3295 microsoft.public.biztalk.general:13355
| >>X-Tomcat-NG: microsoft.public.biztalk.general
| >>
| >>Hi Tomas!
| >>
| >>No there are no other entries in the event log. Here's the relevant
excerpt
| >>from the configuration log file:
| >>
| >>[18:23:30 Info ConfigHelper] Granted 'Logon as Service' permission to
| >>account: WIN2003-DEV\administrator
| >>[18:23:30 Info ConfigHelper] Set property: RunForever on COM+
application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:30 Info ConfigHelper] Set property: ApplicationDirectory on COM+
| >>application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:31 Info ConfigHelper] Added user: WIN2003-DEV\administrator to
role:
| >>SenderToSts on COM+ application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:31 Info ConfigHelper] Added user: win2003-dev\Administrator to
role:
| >>SenderToBizTalk on COM+ application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:31 Info ConfigHelper] Added user: WIN2003-DEV\BizTalk BAS Web
| >>Services Group to role: GetConfigInfo on COM+ application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:31 Info ConfigHelper] Added user: win2003-dev\Administrator to
role:
| >>GetConfigInfo on COM+ application:
| >>Microsoft.BizTalk.KwTpm.StsBizTalkAdapter.StsBizTalkAdapterService
| >>[18:23:31 Info CMsgAdaCfg] Leaving function:
| >> CMsgAdaCfg::CreateNTServiceForComPlusApp
| >>[18:23:32 Info CMsgAdaCfg] Leaving function:
CMsgAdaCfg::ChangeServiceName
| >>[18:23:33 Error CMsgAdaCfg] Could not start service
| >>[18:23:33 Error MsgAdaCfg]
|[vbcol=seagreen]
ig
| >>uration\msgadacfg\msgadacfghelper.cpp(1990): FAILED hr = 8007041d
| >>
| >>[18:23:33 Info CMsgAdaCfg] Leaving function:
CMsgAdaCfg::StartStopNTService
| >>[18:23:33 Error MsgAdaCfg]
|[vbcol=seagreen]
ig
| >>uration\msgadacfg\msgadacfghelper.cpp(878): FAILED hr = 8007041d
| >>
| >>[18:23:33 Info CMsgAdaCfg] Leaving function:
| >> CMsgAdaCfg::RegBizTalkAdapterAsNTService
| >>[18:23:33 Error MsgAdaCfg]
|[vbcol=seagreen]
ig
| >>uration\msgadacfg\msgadacfg.cpp(587): FAILED hr = 8007041d
| >>
| >>[18:23:33 Info CMsgAdaCfg] Leaving function:
CMsgAdaCfg::ConfigureFeature
| >>[18:23:33 Info ConfigFramework] Showing MessageBox with text: Error
| >>157482188 occurred configuring feature ConfigFramework Return Code: 2
| >>[18:23:33 Error ConfigFramework]
|[vbcol=seagreen]
pp
| >>(556): FAILED hr = 8007041d
| >>
| >>Klaus Aschenbrenner
| >>www.csharp.at
| >>http://weblogs.asp.net/klaus.aschenbrenner
| >>
| >>"Tomas Restrepo (MVP)" <tomasr@mvps.org> wrote in message
| >>news:uicUs#1DEHA.2088@TK2MSFTNGP10.phx.gbl...
| >>> Hi Klaus,
| >>>
| >>> > Yes, that was the problem: But now I get the following error message
| >>> during
| >>> > the configuration process:
| >>> >
| >>> > "Error 157432804 occurred configuring feature ConfigFramework"
| >>> >
| >>> > According to the event log the service "BizTalk Sharepoint Messaging
| >>> > Adapter" couldn't be started:
| >>> >
| >>> > "The BizTalk Sharepoint Messaging Adapter service failed to start
due to
| >>> the
| >>> > following error:
| >>> > The service did not respond to the start or control request in a
timely
| >>> > fashion."
| >>> >
| >>> > Any suggestions?
| >>>
| >>> OK, that one definitely didn't happen to me.... Is there any other
related
| >>> entry on the event log?
| >>>
| >>> --
| >>> Tomas Restrepo
| >>> tomasr@mvps.org
| >>>
| >>>
| >>
| >>
| >>
This posting is provided "AS IS" with no warranties, and confers no rights.
EBusiness Server Team
|
|
|
|
|