|
Home > Archive > BizTalk Server Setup > November 2005 > UPDATE: Prerequisites and the Biztalk infinite loop
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
UPDATE: Prerequisites and the Biztalk infinite loop
|
|
|
| It seems as if i have to contact MS PSS in order to download the updates.
Luckily i was able to find this information by rustling through various
blogs. The Biztalk Installation Guide needs to be updated to reflect this
requirement. This is very frustrating.......
"lh" <lhughey@gmail.com> wrote in message
news:%23KGOunu4FHA.1148@tk2msftngp13.phx.gbl...
> Im trying to install Biztalk 2004 and I'm having some problems installing
> the COM+ components at the end of the install (error code 1928). So i
> decided to double check the biztalk setup docs (dated 2/15/2005). The
> docs state that I need the following updates as prerequisites:
> Updates Q828758, Q329433, and Q831950
>
> The lack of these updates may be the source of my problems. But I cannot
> download these updates because they are not listed on Microsofts site.
> The only reference of these updates is in the biztalk setup doc. Its
> seems as if there are two possible fixes to my problem. Either there
> should be an document on the MS download site that states that updates
> Q828758, Q329433, and Q831950 have been rolled up or the biztalk 2004
> installation guide should be updated. Currently, there is NO way for
> ANYONE to meet the initial requirements of a biztalk installation on XP
> (updated with SP2).
>
>
>
>
>
>
| |
|
| ....and I'll bet this didn't work for you, since q828758 com rollup 6 is
for pre-xp/sp2 installations and I'll bet you're trying to install the
development components on Windows XP SP2. See my next post about error
1928 for resolution and the cause.
| |
|
| Oisin,
Thank you very much for your reply. I'm lickin' my chops at the prospect of
a fix for this issue. I dont see your other post. I'm reading posts
through outlook express. I'm guessing you made your posts at a website.
Could you please post your resolution here? I have also done a google for
the terms "Oisin" and "1928" and wasnt able to come up with any results.
thank you,
Lyndon Hughey
"Oisin" <oising@gmail.com> wrote in message
news:1131339130.072207.38920@f14g2000cwb.googlegroups.com...
> ...and I'll bet this didn't work for you, since q828758 com rollup 6 is
> for pre-xp/sp2 installations and I'll bet you're trying to install the
> development components on Windows XP SP2. See my next post about error
> 1928 for resolution and the cause.
>
| |
|
| I've documented a work around and explanation for this error on my
blog;
see http://www.nivot.ca/
- Oisin Grehan
|
|
|
|
|