| Greg Tang 2005-06-14, 5:55 pm |
| I have a question and the following is our environment.
We have a cluster (server A and server B) and it is managed by Application
Center 2000. Server A is the controller and Server B is the member. These 2
servers have a virturl address (common address) and Applications Center 2000
controls the load balance. Server C sends all requests to this virtual
address and Application Center 2000 controls which server should do the work.
The load balance is 50% for server A and 50% for server B.
Last week we had some network problem. After the network problem was fixed,
server B was still up but it didn't get any request. It looks like Server A
did all the work. I did the following and it seems like it went back to
normal.
1. Disabled network card of server B
2. Enabled network card of server B
3. Took Server B off the cluster
4. Put Server B back on the cluster
Can you tell what the problem was?
Many thanks for your help.
--
Greg
|