|
Home > Archive > Application Center Usage > March 2004 > Configuring ACT for load
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Configuring ACT for load
|
|
| cbwardsr 2004-03-30, 12:46 pm |
| While reading the help file on ACT I'm unable to follow the instructions for setting load level. The help says to right click on the test name select properties and on the general tab check Simultaneous browser connections box. When I load up the proper
ties page there is not option to do this, in fact the only option is 'check for robo.txt' and some proxy settings.
If someone could help me with this issue I'd really appreciate
| |
| George Cheng [MSFT] 2004-03-30, 12:46 pm |
| It is under test properties, not project properties.
Thank You
George Cheng
Microsoft Application Center & Index Server Support
Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved
--------------------
| Thread-Topic: Configuring ACT for load
| thread-index: AcQWdn96axyxSgOqSRSiuAO/eNZ/tA==
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
| From: "=?Utf-8?B?Y2J3YXJkc3I=?=" <brittward@msn.com>
| Subject: Configuring ACT for load
| Date: Tue, 30 Mar 2004 08:46:07 -0800
| Lines: 4
| Message-ID: <62FCFB58-224F-46B1-BEA2-E0CC9DE54915@microsoft.com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.applicationcenter.usage
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.applicationcenter.usage:3496
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
|
| While reading the help file on ACT I'm unable to follow the instructions
for setting load level. The help says to right click on the test name
select properties and on the general tab check Simultaneous browser
connections box. When I load up the properties page there is not option to
do this, in fact the only option is 'check for robo.txt' and some proxy
settings.
If someone could help me with this issue I'd really appreciate
|
| |
| cbwardsr 2004-03-31, 11:41 am |
| Thank you for your response. I followed those steps and I get the same property screen which does not have those properties for setting load and other properties. The version I'm using is: framework 1.1; enterprise VS 2003; and the application center t
est is version 1.0.536.0. Have I some how installed the wrong version when I installed the enterprise version? I just can't figure out why this version's help is given me advice that is not possible to implement with the version I have.
Do you have any idea what's going on. Is there some way I can send you a screen shot of the dialog that comes up so you can see that those options are not on that dialog?
----- \"George Cheng [MSFT]\" wrote: -----
It is under test properties, not project properties.
Thank You
George Cheng
Microsoft Application Center & Index Server Support
Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved
--------------------
| Thread-Topic: Configuring ACT for load
| thread-index: AcQWdn96axyxSgOqSRSiuAO/eNZ/tA==
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
| From: "=?Utf-8?B?Y2J3YXJkc3I=?=" <brittward@msn.com>
| Subject: Configuring ACT for load
| Date: Tue, 30 Mar 2004 08:46:07 -0800
| Lines: 4
| Message-ID: <62FCFB58-224F-46B1-BEA2-E0CC9DE54915@microsoft.com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.applicationcenter.usage
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.applicationcenter.usage:3496
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
|
| While reading the help file on ACT I'm unable to follow the instructions
for setting load level. The help says to right click on the test name
select properties and on the general tab check Simultaneous browser
connections box. When I load up the properties page there is not option to
do this, in fact the only option is 'check for robo.txt' and some proxy
settings.
If someone could help me with this issue I'd really appreciate
|
| |
| George Cheng [MSFT] 2004-03-31, 3:43 pm |
| What are the exact steps you are taking once you open the ACT console?
Can your newsgroup reader allow you to post attachements?
Thank You
George Cheng
Microsoft Application Center & Index Server Support
Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved
--------------------
| Thread-Topic: Configuring ACT for load
| thread-index: AcQXOAI75KOmUxWoSn6usMHTHXXAEw==
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
| From: "=?Utf-8?B?Y2J3YXJkc3I=?=" <brittward@msn.com>
| References: <62FCFB58-224F-46B1-BEA2-E0CC9DE54915@microsoft.com>
<3LC1yqnFEHA.2224@cpmsftngxa06.phx.gbl>
| Subject: RE: Configuring ACT for load
| Date: Wed, 31 Mar 2004 07:51:19 -0800
| Lines: 56
| Message-ID: <D0EBB5A4-359A-42AD-B9D8-CA72C7751AFB@microsoft.com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.applicationcenter.usage
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl microsoft.public.applicationcenter.usage:3503
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
|
| Thank you for your response. I followed those steps and I get the same
property screen which does not have those properties for setting load and
other properties. The version I'm using is: framework 1.1; enterprise VS
2003; and the application center test is version 1.0.536.0. Have I some
how installed the wrong version when I installed the enterprise version? I
just can't figure out why this version's help is given me advice that is
not possible to implement with the version I have.
Do you have any idea what's going on. Is there some way I can send you a
screen shot of the dialog that comes up so you can see that those options
are not on that dialog?
----- \"George Cheng [MSFT]\" wrote: -----
It is under test properties, not project properties.
Thank You
George Cheng
Microsoft Application Center & Index Server Support
Note: This article has no warranties implicit or explicit.
All the content is given on the "as is" basis and the user
takes full responsibility for its use and assumption.
Microsoft Corporation Copyright 2004
All Rights Reserved
--------------------
| Thread-Topic: Configuring ACT for load
| thread-index: AcQWdn96axyxSgOqSRSiuAO/eNZ/tA==
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
| From: "=?Utf-8?B?Y2J3YXJkc3I=?=" <brittward@msn.com>
| Subject: Configuring ACT for load
| Date: Tue, 30 Mar 2004 08:46:07 -0800
| Lines: 4
| Message-ID: <62FCFB58-224F-46B1-BEA2-E0CC9DE54915@microsoft.com>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="Utf-8"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| Content-Class: urn:content-classes:message
| Importance: normal
| Priority: normal
| X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
| Newsgroups: microsoft.public.applicationcenter.usage
| Path: cpmsftngxa06.phx.gbl
| Xref: cpmsftngxa06.phx.gbl
microsoft.public.applicationcenter.usage:3496
| NNTP-Posting-Host: tk2msftcmty1.phx.gbl 10.40.1.180
| X-Tomcat-NG: microsoft.public.applicationcenter.usage
|
| While reading the help file on ACT I'm unable to follow the
instructions
for setting load level. The help says to right click on the test name
select properties and on the general tab check Simultaneous browser
connections box. When I load up the properties page there is not
option to
do this, in fact the only option is 'check for robo.txt' and some
proxy
settings.
If someone could help me with this issue I'd really appreciate
|
|
|
|
|
|
|