|
| Hi
I need help on this one, My main problem is that I do not know=20
anything about networking and therefore I'm lost.
A rough outline of what I have (No Windows):
Domain/workgroup =3D STARTREK
Machine 1 named "Hal", PentiumPro 200 128MB RAM=A0=A0IP-192.168.2.37
Running OS/2 Warp 4.0 FP10 (also dual Boot eCS 1.1, seldom used)
3COM 10 MHz NIC
IBMLAN 'peer 2 peer'
In between:
SMC 'barricade 7004BR' 4 port Hub/switch/router=A0=A0IP-192.168.2.1
Output to a cable modem.
Machine 2 named R2D2, AMD=20
Athalon=A01GHz=A0512=A0MB=A0RAM=A0=A0IP-192.168.2.10
Running Mandrakelinux 10.0 OE (also dual Boot Mandrakelinux 9.2)
3COM 100MHz NIC
Samba (3.0.2a)/ LinNeighborhood
The problem, I believe is software configuration.
I have been thru Mandrake (samba) in the last couple weeks and=20
can ping either machine or the router by IP address or by name.=20
In Mandrake I have 2 folders set up that should be visable in=20
OS/2 Warp.
The most recent error message is in OS/2 "NET2453 - The domain=20
controller for this domain cannot be found". OS/2 Warp 4 was=20
installed when it first came out (1996 ?) and has been upgraded=20
thru several fixpacks since then FP10 being the latest. This is=20
the third machine it has been on, always moved by tape (backup).=20
About 5 or 6 years ago Win NT was networked with it,so there=20
maybe incorrect entries and/or no entries in some places that I
still haven't found.I have 2 partitions in the Shared Resources=20
and Connection area that should be available to Samba.=20
Can I recruit anyone to act as a coach/ ? /consultant? After I=20
get the network up I would like to put my printer on the=20
Barricade, now it is on a A/B switch
TIA
=2D-=20
Don't be grumpy, be nice
BillM
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
|
|