|
Home > Archive > Backup Software > October 2004 > Ghost 9 Network hassles...
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Ghost 9 Network hassles...
|
|
| Kenneth 2004-10-06, 5:45 pm |
|
Howdy,
I cannot seem to find my network to restore with Ghost 9 (or Drive
Image 7, or V2i Protector.)
If in Ghost 9 if I boot from the recovery CD and attempt to configure
the network, here's what I get:
The Network configuration dialog shows -
"No network configuration was detected."
The netcard name is displayed correctly, but is grayed out.
IP #1 displays correctly
Subnet #1 displays correctly
IP #2 displays 0.0.0.0.
Subnet #2 displays 0.0.0.0.
How should I proceed to get this thing to see the network properly?
Thanks for any assistance,
--
Kenneth
If you email... Please remove the "SPAMLESS."
| |
| Michael Kimmer 2004-10-07, 5:45 pm |
| Kenneth wrote:
> Howdy,
>
> I cannot seem to find my network to restore with Ghost 9 (or Drive
> Image 7, or V2i Protector.)
>
> If in Ghost 9 if I boot from the recovery CD and attempt to configure
> the network, here's what I get:
>
> The Network configuration dialog shows -
>
> "No network configuration was detected."
>
> The netcard name is displayed correctly, but is grayed out.
>
> IP #1 displays correctly
> Subnet #1 displays correctly
>
> IP #2 displays 0.0.0.0.
> Subnet #2 displays 0.0.0.0.
>
> How should I proceed to get this thing to see the network properly?
>
> Thanks for any assistance,
I had the same issue with the Drive Image 7.04 PQRE: Still I had been able
to access any shared resource in the Utility section (Map network drive)...
(Both LAN and Workgroups (P2P))...As the basics are adapted in the Symantec
RE I assume these steps are alike...?
--
M.f.G.
Michael Kimmer
"Ein Tag an dem Du nicht lächelst ist ein verlorener Tag"
"Eine Nacht in der Du nicht schläfst ist eine verschlafene Nacht"
| |
| Kenneth 2004-10-07, 5:45 pm |
| On Thu, 7 Oct 2004 23:57:56 +0200, "Michael Kimmer"
<michaelkimmer@NOSPAM.xs4all.nl> wrote:
>Kenneth wrote:
>
>I had the same issue with the Drive Image 7.04 PQRE: Still I had been able
>to access any shared resource in the Utility section (Map network drive)...
>(Both LAN and Workgroups (P2P))...As the basics are adapted in the Symantec
>RE I assume these steps are alike...?
Hi Michael,
I don't know just how to respond to your comment.
As you will see elsewhere in this thread, I have never been able to do
anything over the network after booting from any of the CDs. That is
Drive Image, V2i Protector, or Ghost.
If I get it fixed, we will have a party right here!
All the best,
--
Kenneth
If you email... Please remove the "SPAMLESS."
|
|
|
|
|