|
Home > Archive > Data Storage > May 2005 > How do I configure RAID on a FC5300? Is there a console?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
How do I configure RAID on a FC5300? Is there a console?
|
|
| Leo Unacalx 2005-04-10, 2:45 am |
| Hello All. I just purchased an EMC Clariion FC5300 (also known as
Dell 650F). I've got an 005-044993 RAID storage processor--w/ lots of
cache. I've got Cable/HyperTerm plugged into RJ12.. 9600/8/1/even,
hardware flow control----but nothing comes up. I can see a cursor
pause when I press a key in hyperterminal, but that's it?! Can anyone
tell me what I need to do the get the console to come up so I can
configure the RAID features of the SP? If I'm missing the boat and
the RJ12 isn't for configuring the device--please tell me what the
real answer is, and feel free to call me 'thick'. Thanks in advance
for any/all comments. Leo.
| |
| Ramesh Pun 2005-04-12, 5:47 pm |
| Bring in EMC and pay them for it.
Or I can come in and do it for much cheaper. :-)
"Leo Unacalx" <leo@unacalx.com> wrote in message
news:5rdh519c1ih5u76vnn4612fv8idq14i01m@
4ax.com...
> Hello All. I just purchased an EMC Clariion FC5300 (also known as
> Dell 650F). I've got an 005-044993 RAID storage processor--w/ lots of
> cache. I've got Cable/HyperTerm plugged into RJ12.. 9600/8/1/even,
> hardware flow control----but nothing comes up. I can see a cursor
> pause when I press a key in hyperterminal, but that's it?! Can anyone
> tell me what I need to do the get the console to come up so I can
> configure the RAID features of the SP? If I'm missing the boat and
> the RJ12 isn't for configuring the device--please tell me what the
> real answer is, and feel free to call me 'thick'. Thanks in advance
> for any/all comments. Leo.
| |
| David Tang 2005-05-01, 5:49 pm |
|
"Leo Unacalx" <leo@unacalx.com> wrote in message news:5rdh519c1ih5u76vnn4612fv8idq14i01m@
4ax.com...
> Hello All. I just purchased an EMC Clariion FC5300 (also known as
> Dell 650F). I've got an 005-044993 RAID storage processor--w/ lots of
> cache. I've got Cable/HyperTerm plugged into RJ12.. 9600/8/1/even,
> hardware flow control----but nothing comes up. I can see a cursor
> pause when I press a key in hyperterminal, but that's it?! Can anyone
> tell me what I need to do the get the console to come up so I can
> configure the RAID features of the SP? If I'm missing the boat and
> the RJ12 isn't for configuring the device--please tell me what the
> real answer is, and feel free to call me 'thick'. Thanks in advance
> for any/all comments. Leo.
Read this NG infrequently - the following might help:
http://support.dell.com/support/top...&l=en&s=gen&cs=
|
|
|
|
|