| markryde@gmail.com 2006-12-25, 1:16 am |
| Hello,
I have a new IBM DS300.
I had followed IBM DS300 manual
("IBM TotalStorage DS300 and DS400 Best Practices Guide")
I powered up the DS300.
I connected directly a linux machine to the management port of
controller B.
I could ping the 192.168.70.124 from linux.
Than I ran:
telnet 192.168.70.124 results in this response:
IBM TotalStorage DS Series...
Type '?' for help
The TAB key will list the valid parameters
Operator level password:
Then I tried , according to the manual, PASSW0RD (with a zero)
OR passw0rd ; both trials failed.
According to the manual telnet should bring me to
a promt where i should enter "admin" and then be prompted
for the default password.
I googled for this problem and I found this thread:
http://www-128.ibm.com/developerwor...um=740#13781684
According to this thread, a 13N1792 Cable solved the problem.
Did anybody encountered this problem ? What is this cable ? can
this problem be solved without this cable ? is this cable supposed to
be
shipped with the DS300 machine ?
Regads,
Mark
|