|
Home > Archive > Data Storage > May 2006 > Getting one BIG C drive from multiple servers.
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Getting one BIG C drive from multiple servers.
|
|
|
| The subject line may be a bit stupid but I am looking to setup a system
where we have a requirment that we have a single view into a 32 TB storage
system (think of this as a one big C drive).
Right now we got 6 servers each with around 5 TB of storage, but to access
them we need to mount each server (Win 2003) and work on it which is
becoming cubersom.
Will iSCSI do the trick ? Product like SanMelody ?
Jay
Jay
| |
| Bill Todd 2006-04-09, 7:01 pm |
| Jay wrote:
> The subject line may be a bit stupid but I am looking to setup a system
> where we have a requirment that we have a single view into a 32 TB storage
> system (think of this as a one big C drive).
>
> Right now we got 6 servers each with around 5 TB of storage, but to access
> them we need to mount each server (Win 2003) and work on it which is
> becoming cubersom.
>
> Will iSCSI do the trick ? Product like SanMelody ?
Possibly, but it's not clear they'd to it well. If SanMelody can be
installed onto your existing servers while still leaving them available
to perform their current tasks, it can export some of their storage
using iSCSI - or you could use iSCSI more directly. But either of those
would do is give one of your servers access to the combined storage
resources (which it could then combine into a local file system - e.g.,
by creating a RAID volume): it would then have to turn around and
export that file system back to the other servers again (say, as a
'share') - so most access to data would require two hops over the
network in each direction: a read request would go first from the
client to the main file server, which would (unless it held the
requested data in its cache) then request the data from the server whose
disk actually held it, at which point the data would be returned to the
main file server, which would then send it to the original client (most
writes would take a similarly circuitous path).
So you'd really prefer an arrangement which allowed clients to interact
more directly with the server which held the target data. Some
'cluster' file systems like SANergy (from IBM/Tivoli, which IIRC is
available on Win2K and thus likely on Win2K3) and CXFS (from SGI and
Linux, but not AFAIK available on Win2K/Win2K3) support this, though
metadata operations are still handled centrally.
- bill
| |
| Tim Mullen 2006-04-18, 12:13 am |
| In <hsKdnV6B1NSCMaXZRVn-tg@metrocastcablevision.com> Bill Todd <billtodd@metrocast.net> writes:
>CXFS (from SGI and Linux, but not AFAIK available on Win2K/Win2K3)
I know this isn't exactly what was asked, but CXFS does run on
WinXP, so for anyone interested it might be worthwhile checking with
SGI to see if they also support Win2K. I've got a small cluster with
IRIX and XP clients. We're using it for video, and it Works well.
--
Tim Mullen
------------------------------------------------------------------
Am I in your basement? Looking for antique televisions, fans, etc.
------ finger this account or call anytime: (212)-463-0552 -------
| |
| Chatz 2006-04-18, 12:13 am |
| CXFS runs on Linux, Windows 2K/XP/2003, Mac, Solars etc.
On Windows you are presented with multiple filesystems under a single
drive letter. What filesystems are mounted on the node are managed
centrally, once each Windows box is configured with CXFS no further
CXFS administration is needed on those boxes. When a Windows box is
rebooted it automatically remounts all the CXFS filesystems.
See http://www.sgi.com/cxfs
David
| |
|
| Has any one look at Zetera ? Like www.hammer-storage.com
Jay
"Jay" <jay@objectcube.com> wrote in message
news:hEZZf.18823$Rh6.7466@fe12.news.easynews.com...
> The subject line may be a bit stupid but I am looking to setup a system
> where we have a requirment that we have a single view into a 32 TB storage
> system (think of this as a one big C drive).
>
> Right now we got 6 servers each with around 5 TB of storage, but to access
> them we need to mount each server (Win 2003) and work on it which is
> becoming cubersom.
>
> Will iSCSI do the trick ? Product like SanMelody ?
>
> Jay
>
> Jay
>
>
>
|
|
|
|
|