|
Home > Archive > Data Storage > May 2006 > reading an lto1 tape on an lto2 tape drive?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
reading an lto1 tape on an lto2 tape drive?
|
|
| robin.krane@svlsa.com 2006-05-04, 7:12 pm |
| Hi - I upgraded the tape drive an LTO1 (Overland) to an HP LTO2 tape
drive. I was told that I would be able to see the LTO1 tapes on the
drive.
I inserted the LTO1 tape and catologed it but the catalog failed.
Is there something I need to do? The tapes are 2 years old so they are
no longer on the job list. I am using Backup Exec 9.0 at the moment.
RLK
| |
|
| In article <1146771190.741541.101020@j33g2000cwa.googlegroups.com>,
robin.krane@svlsa.com says...
>
>Hi - I upgraded the tape drive an LTO1 (Overland) to an HP LTO2 tape
>drive. I was told that I would be able to see the LTO1 tapes on the
>drive.
>
>I inserted the LTO1 tape and catologed it but the catalog failed.
>
>Is there something I need to do? The tapes are 2 years old so they are
>no longer on the job list. I am using Backup Exec 9.0 at the moment.
>RLK
>
is listed as compatible and normally does work
i'd call overland and have them figure it out
that's www.overlandstorage.com
_____ . .
' \\ . . |>>
O// . . |
\_\ . . |
| | . . . |
/ | . www.EvenEnterprises.com . . . |
/ .| info@EvenEnterprises.com . . . |
/ . | 310-544-9439 / 310-544-9309 fax . . . o
----------------------------------------------------------------------
Authorized - DIRECT VAR/VAD/Distributor for new mid-high end storage
iSCSI/NAS/SAN/RAID from EMC, HP, Equallogic, Quantum, OverLand Storage
|
|
|
|
|