|
Home > Archive > Data Storage > September 2006 > Emulex LP-9002L-E
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| derek123 2006-08-22, 7:17 pm |
|
Hello,
I consider to buy four refurbished Emulex LP9002L-E fibre channel host bus
adapters for my Lab servers (Solaris, AIX, HP-UX, Windows). The disk array
is IBM DS8100.
I would like to perform some failover and clustering tests:
1. Failover software such as pvlinks or Veritas DMP.
2. Cluster Server / High Availability Software such as HP ServiceGuard,
Veritas Foundation Suite/HA.
As far as I know the LP9002L with -E suffix has EMC firmware embedded.
The question is:
Is it necessary (and possible) to upload the original Emulex firmware to
those HBAs?
In case it is not possible, will I be able to connect my servers to IBM
DS8100 disk array using -E model, or should I consider another HBA ?
I will appreciate any suggestion.
Thanks in Advance
Darek
| |
| storage@chello.nl 2006-08-23, 1:16 pm |
| Derek,
You have to look at the interoperability matrix of the DS8100 at
http://www-03.ibm.com/servers/stora...00/interop.html
and at http://www.emulex.com/ts/docoem/ibm/index.htm for the firmware
and drivers.
I dont know anything about the -E but we are running AIX and Windows
hosts with LP9002L HBA's connected to a DS box.
Greetings.
derek123 schreef:
> Hello,
>
> I consider to buy four refurbished Emulex LP9002L-E fibre channel host bus
> adapters for my Lab servers (Solaris, AIX, HP-UX, Windows). The disk array
> is IBM DS8100.
> I would like to perform some failover and clustering tests:
> 1. Failover software such as pvlinks or Veritas DMP.
> 2. Cluster Server / High Availability Software such as HP ServiceGuard,
> Veritas Foundation Suite/HA.
>
> As far as I know the LP9002L with -E suffix has EMC firmware embedded.
> The question is:
>
> Is it necessary (and possible) to upload the original Emulex firmware to
> those HBAs?
> In case it is not possible, will I be able to connect my servers to IBM
> DS8100 disk array using -E model, or should I consider another HBA ?
>
> I will appreciate any suggestion.
> Thanks in Advance
>
> Darek
| |
| Bustoff 2006-09-01, 7:19 am |
|
"derek123" <derek123@poczta.onet.pl> wrote in message
news:op.teo91ig81ftvjk@dw-ff38ed6d1172...
>
> Hello,
>
> I consider to buy four refurbished Emulex LP9002L-E fibre channel host bus
> adapters for my Lab servers (Solaris, AIX, HP-UX, Windows). The disk array
> is IBM DS8100.
> I would like to perform some failover and clustering tests:
> 1. Failover software such as pvlinks or Veritas DMP.
> 2. Cluster Server / High Availability Software such as HP ServiceGuard,
> Veritas Foundation Suite/HA.
>
> As far as I know the LP9002L with -E suffix has EMC firmware embedded.
> The question is:
>
> Is it necessary (and possible) to upload the original Emulex firmware to
> those HBAs?
> In case it is not possible, will I be able to connect my servers to IBM
> DS8100 disk array using -E model, or should I consider another HBA ?
>
> I will appreciate any suggestion.
> Thanks in Advance
>
> Darek
The E just means that the HBA comes with EMC packaging and documentation.
EMC, HP, IBM do not make any changes to the electronics, you can download
the firmware and drivers directly from Emulex by navigating to the OEM page.
The driver software settings have been configured by the vendor. Not
familiar with Open Systems drivers but the Windows drivers have a modified
Setup file by the vendor which contain the settings for their product.
|
|
|
|
|