| Author |
EMC DS-16B ... resetting to defaults password
|
|
| Jean-Paul VILLETTE 2007-02-13, 7:13 pm |
| Hello,
I have an old DS-16B and i want to reset its configuration to defaults
to have the default password as defined in the documentation.
I have tried several times the front panel "Reset to defaults" but the
password doesn't seem to be the default one.
Any idea to reset it ?
Regards,
JPV
| |
| Nabeel Ahmed 2007-02-14, 1:15 am |
| Login using a serial cable and then try the procedure in the manual.
"Jean-Paul VILLETTE" <villettejp@free.fr> wrote in message
news:45D22FC6.2010401@free.fr...
> Hello,
>
> I have an old DS-16B and i want to reset its configuration to defaults to
> have the default password as defined in the documentation.
>
> I have tried several times the front panel "Reset to defaults" but the
> password doesn't seem to be the default one.
>
> Any idea to reset it ?
>
> Regards,
> JPV
| |
| Jean-Paul VILLETTE 2007-02-14, 7:13 am |
| Hello,
There is no serial cable on this model. The DS-16B doesn't have one
but the DS-8B have one. I have a DS-16B, and that's the problem.
Any way, thanks.
JPV
Nabeel Ahmed a écrit :
> Login using a serial cable and then try the procedure in the manual.
>
> "Jean-Paul VILLETTE" <villettejp@free.fr> wrote in message
> news:45D22FC6.2010401@free.fr...
>
>
| |
| Gunhaver05 2007-02-14, 1:14 pm |
| This can be tricky sometimes. Serial port is not intended for most
users as it can be a security concern. I looked at the available
diagrams and manuals on the DS-16B. They refer to the serial port but
don't explicitly spell out it's location. I would recommend checking
the backside to find out if there is a small panel that is closed with
a Torx screw (star-shaped) or removing the front panels to see if it's
hidden behind them.
- Gun
On Feb 14, 4:26 am, Jean-Paul VILLETTE <villett...@free.fr> wrote:[vbcol=seagreen]
> Hello,
>
> There is no serial cable on this model. The DS-16B doesn't have one
> but the DS-8B have one. I have a DS-16B, and that's the problem.
>
> Any way, thanks.
> JPV
>
> Nabeel Ahmed a =E9crit :
>
>
>
to[vbcol=seagreen]
>
>
>
| |
| Jean-Paul VILLETTE 2007-02-14, 7:14 pm |
| Hello,
I think the reference to the serial port is only for DS-8B. I tried
to find an hidden one on the DS-16B without any success.
Several google searches speak about a "recovery password" with the
installation of a specific firmware... i don't have details...
Any other idea ?
Regards,
Jean-Paul VILLETTE
Gunhaver05 a écrit :
> This can be tricky sometimes. Serial port is not intended for most
> users as it can be a security concern. I looked at the available
> diagrams and manuals on the DS-16B. They refer to the serial port but
> don't explicitly spell out it's location. I would recommend checking
> the backside to find out if there is a small panel that is closed with
> a Torx screw (star-shaped) or removing the front panels to see if it's
> hidden behind them.
>
> - Gun
>
> On Feb 14, 4:26 am, Jean-Paul VILLETTE <villett...@free.fr> wrote:
>
>
| |
| Maxim S. Shatskih 2007-02-14, 7:14 pm |
| Contact EMC or use EMC's cite.
--
Maxim Shatskih, Windows DDK MVP
StorageCraft Corporation
maxim@storagecraft.com
http://www.storagecraft.com
"Jean-Paul VILLETTE" <villettejp@free.fr> wrote in message
news:45D37386.5040500@free.fr...[vbcol=seagreen]
> Hello,
>
> I think the reference to the serial port is only for DS-8B. I tried
> to find an hidden one on the DS-16B without any success.
>
> Several google searches speak about a "recovery password" with the
> installation of a specific firmware... i don't have details...
>
> Any other idea ?
>
> Regards,
> Jean-Paul VILLETTE
>
>
> Gunhaver05 a écrit :
to[vbcol=seagreen]
| |
| Jean-Paul VILLETTE 2007-02-14, 7:14 pm |
| Hello,
Thanks. I just tried by i don't think this action will be free of
charge... In Progress ...
If someone has an other idea .....
Regards,
Jean-Paul VILLETTE
Maxim S. Shatskih a écrit :
> Contact EMC or use EMC's cite.
>
| |
| Gunhaver05 2007-02-15, 7:12 pm |
| EMC quotes solution ID 1.0.184245148.2873664. It states that an EMC
rep will be required to perform the reset.
On Feb 14, 4:08 pm, Jean-Paul VILLETTE <villett...@free.fr> wrote:
> Hello,
>
> Thanks. I just tried by i don't think this action will be free of
> charge... In Progress ...
>
> If someone has an other idea .....
>
> Regards,
> Jean-Paul VILLETTE
>
> Maxim S. Shatskih a =E9crit :
>
>
>
>
> - Show quoted text -
| |
| PAUL LEEBER 2007-02-15, 7:12 pm |
|
Jean-Paul VILLETTE Wrote:
> Hello,
>
> I have an old DS-16B and i want to reset its configuration to defaults
>
> to have the default password as defined in the documentation.
>
> I have tried several times the front panel "Reset to defaults" but the
> password doesn't seem to be the default one.
>
> Any idea to reset it ?
>
> Regards,
> JPVIf you want to call here one of my teshs will help
my # 781 982 9664
ask for Paul Leeber
--
PAUL LEEBER
|
|
|
|