|
Home > Archive > Data Storage > April 2007 > EMC's Clariion and navisphere hosts agent
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
EMC's Clariion and navisphere hosts agent
|
|
|
| Hi,
I have a clariion fc5300 and a brocade 2400 switch in my lab. I also
have EMC's navisphere manager but I do not have navisphere hosts agent
( mainly for solaris and hp-ux 11iv2 ) so I can't use the navisphere
manager to control my storage. Does anyone have? Please help and
thanks.
| |
| Arne Joris 2007-04-10, 1:14 pm |
| > I have a clariion fc5300 and a brocade 2400 switch in my lab. I also
> have EMC's navisphere manager but I do not have navisphere hosts agent
> ( mainly for solaris and hp-ux 11iv2 ) so I can't use the navisphere
> manager to control my storage. Does anyone have? Please help and
You can manage your storage through navisphere without host agents,
but you'll need to register the HBAs in your hosts manually.
I'm not sure what exactly the host agent does for PowerPath
managing your HBA, but you can make it work without it.
| |
| Slawek 2007-04-20, 7:14 pm |
| Chaps,
Is anybody can tell me how can I extract (i.e. what is the command to be
executed from the prompt line) configuration from Clariion boxes?
Thank you!
S.
"Arne Joris" <ArneJoris@yahoo.ca> wrote in message
news:1176218620.916264.320050@o5g2000hsb.googlegroups.com...
>
> You can manage your storage through navisphere without host agents,
> but you'll need to register the HBAs in your hosts manually.
> I'm not sure what exactly the host agent does for PowerPath
> managing your HBA, but you can make it work without it.
>
>
| |
|
| On Apr 20, 11:06 pm, "Slawek" <xew...@gazeta.pl> wrote:
> Chaps,
>
> Is anybody can tell me how can I extract (i.e. what is the command to be
> executed from the prompt line) configuration from Clariion boxes?
>
> Thank you!
>
> S.
>
I believe the command: 'navicli -h <IP of Service Processor> getall'
will give you the full config... you will need NaviCLI installed on
the host you are running the command from, http://powerlink.emc.com
|
|
|
|
|