|
Home > Archive > Data Storage > June 2007 > Reading disk temperature from SMART info
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Reading disk temperature from SMART info
|
|
| level13@gmail.com 2007-06-03, 1:13 pm |
| I recently bought an external WD MyBook 500 GB drive. The enclosed
software (WD diagnostics) enables me to read drive's SMART parameters
(I thought this would only be possible with internal drives) which is
good.
However, I'd like to know how to translate its "Temperature" parameter
into something usable -- i.e. currently it shows "83", while under
"worst" it shows "77". When the disk is turned on, it's usually around
"103". Clearly this number is neither Fahrenheit nor Kelvin -- is
there any way to "translate" this into actual temperature value?
Someone mentioned I should check the raw data of this parameter;
however, the WD diagnostics doesn't show raw data of various SMART
parameters.
| |
| Arno Wagner 2007-06-04, 1:13 am |
| In comp.sys.ibm.pc.hardware.storage level13@gmail.com wrote:
> I recently bought an external WD MyBook 500 GB drive. The enclosed
> software (WD diagnostics) enables me to read drive's SMART parameters
> (I thought this would only be possible with internal drives)
It is not possible in a generic way over USB. WD seems
to use some vendor-extension.
> which is good.
> However, I'd like to know how to translate its "Temperature" parameter
> into something usable -- i.e. currently it shows "83", while under
> "worst" it shows "77". When the disk is turned on, it's usually around
> "103". Clearly this number is neither Fahrenheit nor Kelvin -- is
> there any way to "translate" this into actual temperature value?
> Someone mentioned I should check the raw data of this parameter;
> however, the WD diagnostics doesn't show raw data of various SMART
> parameters.
Actually the disk should use C or F as raw data (typically C,
since F is only used in some leftover backwards countries).
Seems to me WD screwed this one up.
Arno
| |
| Lynn McGuire 2007-06-04, 1:14 pm |
| >I recently bought an external WD MyBook 500 GB drive. The enclosed
> software (WD diagnostics) enables me to read drive's SMART parameters
> (I thought this would only be possible with internal drives) which is
> good.
Try http://www.hdtune.com/
Lynn
| |
| Folkert Rienstra 2007-06-04, 7:14 pm |
| "Arno Wagner" <me@privacy.net> wrote in message news:5ch5kqF30l376U2@mid.individual.net
> In comp.sys.ibm.pc.hardware.storage level13@gmail.com wrote:
[vbcol=seagreen]
Because you have been conditioned by the babblebot(s).
[vbcol=seagreen]
> It is not possible in a generic way over USB.
Yes, it is.
> WD seems to use some vendor-extension.
>
>
[vbcol=seagreen]
> Clearly this number is neither Fahrenheit nor Kelvin --
Because it is a normalized value: bad is lower.
In this case meaning hotter is lower.
> is there any way to "translate" this into actual temperature value?
Maybe. It could make sense if the 0 dC reference was 125.
103 would make 22 dC
83 would make 42 dC
77 would make 48 dC
Right. The actual values.
[vbcol=seagreen]
>
> Actually the disk should use C or F as raw data (typically C,
> since F is only used in some leftover backwards countries).
> Seems to me WD screwed this one up.
Of course they did in your little conspiracy riddled world.
>
> Arno
| |
| level13@gmail.com 2007-06-06, 7:13 am |
| Well, I tried HDtune as well as some other utilities (from Everest
on). None of them can show SMART data from this drive, so I guess only
"WD Diagnostics" is able to do this -- obviously it is using some
vendor-extension.
>Maybe. It could make sense if the 0 dC reference was 125.
> 103 would make 22 dC
> 83 would make 42 dC
> 77 would make 48 dC
I presume this is only an example? And to get more accurate info I
should probably obtain the "0 dC" reference somewhere (I'm getting the
feeling it's 200, but I may be wrong)?
As for WD support... crappy. :O They seem to not know much about the
stuff they sell.
| |
| Rod Speed 2007-06-06, 7:13 pm |
| level13@gmail.com wrote:
> Well, I tried HDtune as well as some other utilities (from Everest
> on). None of them can show SMART data from this drive, so I guess only
> "WD Diagnostics" is able to do this -- obviously it is using some
> vendor-extension.
Or maybe those arent valid values since the numbers make no sense.
[vbcol=seagreen]
> I presume this is only an example? And to get more accurate info I
> should probably obtain the "0 dC" reference somewhere (I'm getting the
> feeling it's 200, but I may be wrong)?
>
> As for WD support... crappy. :O They seem to not know much about the
> stuff they sell.
| |
| Folkert Rienstra 2007-06-06, 7:13 pm |
| <level13@gmail.com> wrote in message news:1181117576.700018.114950@n4g2000hsb.googlegroups.com
> Well, I tried HDtune as well as some other utilities (from Everest on).
> None of them can show SMART data from this drive,
> so I guess only "WD Diagnostics" is able to do this
> -- obviously it is using some vendor-extension.
Or just using a standard newer extension that no one else yet uses.
AFAICT the others use a standard S.M.A.R.T. extension driver that needs
an injection point in the USB driver (or any driver that services the device).
The WD app may just have it's own extension built in and tap in to the USB
driver directly without needing an entry point.
>
[vbcol=seagreen]
> I presume this is only an example?
No, I secretly borrowed your drive and stuck a temperature probe in there.
> And to get more accurate info I should probably obtain the "0 dC" reference somewhere
And hope there is some linear relationship, not some complicated formula.
> (I'm getting the feeling it's 200, but I may be wrong)?
If it has a teflon top on it for turbo frying an egg on and
your room temperature is usually 97 dC you might be right.
>
> As for WD support... crappy. :O
> They seem to not know much about the stuff they sell.
Or maybe they feel there isn't anything to tell.
|
|
|
|
|