|
Home > Archive > Linux Debian support > March 2005 > Nic 3com 3C905C-TX not found by debian Sarge 2.4.27
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Nic 3com 3C905C-TX not found by debian Sarge 2.4.27
|
|
| Peter Bielert 2005-02-27, 5:46 pm |
| Hello Debian users,
I try to install a new server distribution based on Debian Sarge, kernel
2.4.27, but it just makes my Realtek RTL-8029 accessible as eth1. There
is no eth0 nor eth2 in the /etc/network/interfaces file just eth1, but
the 3com nic is mentioned during the boot process.
Has anybody an idea what I have to do to make the 3com nic work?
Here's an excerpt from the /var/log/messages:
(The first and the last line are only included to show that there are no
lines missing concerning the nics.)
Feb 27 22:50:39 sonne kernel: EXT3-fs: mounted filesystem with ordered
data mode.
Feb 27 22:50:39 sonne kernel: ne2k-pci.c:v1.02 10/19/2000 D. Becker/P.
Gortmaker
Feb 27 22:50:39 sonne kernel: http://www.scyld.com/network/ne2k-pci.html
Feb 27 22:50:39 sonne kernel: PCI: Found IRQ 7 for device 00:09.0
Feb 27 22:50:39 sonne kernel: eth0: RealTek RTL-8029 found at 0xe000,
IRQ 7, 00:20:18:2E:9F:FC.
Feb 27 22:50:39 sonne kernel: PCI: Found IRQ 11 for device 00:0a.0
Feb 27 22:50:39 sonne kernel: 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html
Feb 27 22:50:39 sonne kernel: 00:0a.0: 3Com PCI 3c905C Tornado at
0xd800. Vers LK1.1.18
Feb 27 22:50:39 sonne kernel: PCI: Found IRQ 9 for device 00:0d.0
Feb 27 22:50:39 sonne kernel: PCI: Sharing IRQ 9 with 00:0c.0
Feb 27 22:50:39 sonne kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI
HBA DRIVER, Rev 6.2.36
I had SuSE Linux from release 7.x to 9.x installed on the same hardware
and the 3com nic was correctly installed/configured, so the hardware
seems to be OK.
Thanks for paying attention.
Peter
| |
| Peter Bielert 2005-02-28, 5:45 pm |
| Hello Debian Users,
do you have any suggestions to solve the problem? Are you missing any
information about the problem or system or whatever? Which information
do I have to add for you?
Please, give me a hint.
Peter
| |
| Peter Bielert 2005-03-02, 5:45 pm |
| No answer required any more, got a hint from another forum, which solved
the problem successfully.
|
|
|
|
|