|
Home > Archive > Linux Debian support > January 2006 > Config of Debian (kernel?) IDE disk lookups
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Config of Debian (kernel?) IDE disk lookups
|
|
|
| I have a problem after a severe server upgrade.
We upgraded from a IDE/SCSI to a full SCSI setup.
Strangely, even after removing every hdx reference we tought of the kernel
is referring to /hda /hdb /hdc /hdd while we have only /hda cdrom now.
This is slowing down the server startup enormously.
/etc/fstab is changed alright and /etc/hdparm and /etc/smart settings are
changed also.
I've seen that installing Debian on other machines is setting this config to
the right number of /hdx configuration disks, but I've got no clue where
this config could be stored.
output of dmesg:
hda: PHILIPS CDRWDVD3210, ATAPI CD/DVD-ROM drive
hdc: IRQ probe failed (0xfffff4f8)
hdc: IRQ probe failed (0xfffff4f8)
hdc: no response (status = 0x0a), resetting drive
hdc: IRQ probe failed (0xfffff4f8)
hdc: no response (status = 0x0a)
hdd: IRQ probe failed (0xfffff4f8)
hdd: IRQ probe failed (0xfffff4f8)
hdd: no response (status = 0x0a), resetting drive
hdd: IRQ probe failed (0xfffff4f8)
hdd: no response (status = 0x0a)
and further down again:
VP_IDE: IDE controller at PCI slot 0000:00:04.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci0000:00:04.1
VP_IDE: port 0x01f0 already claimed by ide0
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
hdc: IRQ probe failed (0xffffa4f8)
hdc: IRQ probe failed (0xffffa4f8)
hdc: no response (status = 0x0a), resetting drive
hdc: IRQ probe failed (0xffffa4f8)
hdc: no response (status = 0x0a)
hdd: IRQ probe failed (0xffffa4f8)
hdd: IRQ probe failed (0xffffa4f8)
hdd: no response (status = 0x0a), resetting drive
hdd: IRQ probe failed (0xffffa4f8)
hdd: no response (status = 0x0a)
Thanks for any sugggestions
David
| |
| Bill Marcum 2006-01-15, 8:46 pm |
| On Mon, 16 Jan 2006 00:58:31 +0100, dalo
<daloNOsp@mPLZibelgique.com> wrote:
> I have a problem after a severe server upgrade.
>
> We upgraded from a IDE/SCSI to a full SCSI setup.
> Strangely, even after removing every hdx reference we tought of the kernel
> is referring to /hda /hdb /hdc /hdd while we have only /hda cdrom now.
>
Have you turned off the second IDE interface in the BIOS?
--
If you put it off long enough, it might go away.
| |
|
| Bill Marcum berichtte ons:
> On Mon, 16 Jan 2006 00:58:31 +0100, dalo
> <daloNOsp@mPLZibelgique.com> wrote:
> Have you turned off the second IDE interface in the BIOS?
>
>
Yes, that was one of the last tries i've did, and it changed nothing during
kernel boot.
Strangely it seems to me that these hdx scan setup are being set during
system setup.
David
|
|
|
|
|