| Author |
FC4 installation Failure .....Heeeeeeeeellllllllllllllllllllppppp
|
|
| skyrider 2005-08-05, 5:48 pm |
| Hi Folks,
After about 15 tries...i cannot get get FC4 to install
it fails everytime on Disk3 file xorg-x11-devel-6.8.2-31.i386
i have tried playing with partition sizes
i have 3 directories
/
/boot
swap
/ = 13gb
/boot = 400mb
swap = 1300mb
any suggestion greatly appreciated
Barry
| |
|
|
| Lenard 2005-08-05, 5:48 pm |
| skyrider wrote:
> Hi Folks,
>
> After about 15 tries...i cannot get get FC4 to install
>
> it fails everytime on Disk3 file xorg-x11-devel-6.8.2-31.i386
<snip>
> any suggestion greatly appreciated
1. Bad burn????
Did you check the sda1sums for the downloads before you created the CD's
Try burning the third CD again (if the sha1sum is OK) at the slowest
speed the burner supports.
2. Dirty media????
Check (visually) if the CD has a scratch or dirty spot on it.
3. Skip the installation of this package.
Follow the instructions found here (Section 12);
http://fedora.redhat.com/docs/fedor...l-guide-en/fc4/
Modify the installation of the X Windows System and remove the package
from the selected list.
--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." -- B. Franklin, 1759
| |
| peanutwhistle 2005-08-05, 5:48 pm |
|
With the greatest respect to the always fine posts and posters, why not
check the CDs you've burned with the CD drive you're about to install
from:
>linux mediacheck
<http://fedora.redhat.com/download/#write>
Redhat implies this will not only check the sha1sums but the burn too!
Best luck and wishes. Please tell us how it turns out.
| |
| diten47@yahoo.com 2005-08-10, 7:47 am |
|
skyrider wrote:
> Hi Folks,
>
> After about 15 tries...i cannot get get FC4 to install
>
> it fails everytime on Disk3 file xorg-x11-devel-6.8.2-31.i386
>
> i have tried playing with partition sizes
> i have 3 directories
> /
> /boot
> swap
>
> / = 13gb
> /boot = 400mb
> swap = 1300mb
>
> any suggestion greatly appreciated
>
> Barry
|
|
|
|