VPN - Netgear FVS318 to FVS318 - no tunnel - take a look at my settings - what am I missing?

This is Interesting: Free IT Magazines  
Home > Archive > VPN > June 2005 > Netgear FVS318 to FVS318 - no tunnel - take a look at my settings - what am I missing?





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author Netgear FVS318 to FVS318 - no tunnel - take a look at my settings - what am I missing?
Personal User

2005-06-07, 2:46 am

Both PC's and routers are online - I have yet to establish a tunnel -
something I have wrong or am overlooking, please look through these
settings and tell me what I am missing or have wrong

Till I get this configured, firewalls are down

Thanks --

__________________________________

gateway A = Home office - will be main location

Gateway b = Business location 1

__________________________________

gateway A = Wan IP changes with DHCP -but am using current one on
lease

xxx.xxx.xxx.127

internal IP gateway A (VFS 318v3) is 192.168.0.1
subnet mask of 255.255.255.0
default gateway of 192.168.0.1

IP's of internal PC's are 192.168.0.2 and .3

Gateway B Wan Ip xxx.xxx.xxx.57

internal Ip (VFS 318v3) is 192.168.1.1
subnet mask of 255.255.255.0
default gateway of 192.168.1.1

internal PC ip's are 192.168.1.2 and .3

________________________________

Ike policy settings are

Both directions

Main mode

local and remote IP addresses are correct and have been double checked
- the opposite for both locations

________________________________

IKe SA settings are

preshared key qwertyqwertyqwerty

Triple DES

SHA-1

DH group is group one

SA lifetime of 28800 seconds

_______________________________

VPN policy settings

are with same name

remote VPN adresses are correct and double checked - merely the
opposite for both locations

Traffic selector is subnet address

Start IP address: ... 192.168.0.1
Finish IP address: .. greyed out
Subnet Mask: ... 255.255.255.0

Remote subnet address

Remote IP - 192.168.1.1
Finish IP address: ... greyed out
Subnet Mask: ... 255.255.255.0

AH configuration is _not_ enabled

ESP config is

Enable encryption

Enable authentication

netbios enable

Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com