|
Home > Archive > Netware Webserver > July 2006 > Apache won't load on NW 6.5 SP5
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Apache won't load on NW 6.5 SP5
|
|
| Gina@nospamme.net 2006-07-26, 1:11 am |
| New Netware 6.5 SP5 server with Apache installed. During initial setup,
had problem with the Certificate server so the SSL Certificate objects
for the new server did not get created during initial setup.
Fixed the Certificate server problem and did PKIDIAG on this new server
but ap2webup.ncf still won't load with error relating to SSL problem.
Rebooted the server and still got same error.
How can I reinstall apache and if that would fix the problem?
Thanks
Gina
| |
| Anders Gustafsson 2006-07-26, 7:11 am |
| ,
> Fixed the Certificate server problem and did PKIDIAG on this new server
> but ap2webup.ncf still won't load with error relating to SSL problem.
> Rebooted the server and still got same error.
>
Please post the exact error message. It could be either of two things:
1. Certificate problem
2. Something else grabbing port 443
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195
| |
| Gina@nospamme.net 2006-07-26, 1:12 pm |
| The error is [crit] (10043) Unknown error: make_secure_socket: failed to
get a socket for port 443 Configuration Failed
Already did the PKIDIAG to recreate the SSL certificate and the related
SSL objects looked the same as other servers now.
Rebooted and still got the same error. This is a basic NetWare 6.5 server
with nothing on it. How can I check if port 443 is in use?
Thanks
Gina
> ,
server[vbcol=seagreen]
> Please post the exact error message. It could be either of two things:
> 1. Certificate problem
> 2. Something else grabbing port 443
>
> - Anders Gustafsson, Engineer, CNE6, ASE
> NSC Volunteer Sysop
> Pedago, The Aaland Islands (N60 E20)
>
> Novell does not monitor these forums officially.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> Using VA 5.51 build 315 on Windows 2000 build 2195
>
| |
| Gina@nospamme.net 2006-07-26, 1:12 pm |
| Reinstalled apache and now apache2 loads fine now.
Gina
> The error is [crit] (10043) Unknown error: make_secure_socket: failed to
> get a socket for port 443 Configuration Failed
>
> Already did the PKIDIAG to recreate the SSL certificate and the related
> SSL objects looked the same as other servers now.
>
> Rebooted and still got the same error. This is a basic NetWare 6.5
server
> with nothing on it. How can I check if port 443 is in use?
>
> Thanks
> Gina
>
> server
problem.[vbcol=seagreen]
>
| |
| Timothy Leerhoff 2006-07-26, 1:12 pm |
| You have a couple things to check this.
1 - edit the sys:\apache2\conf\httpd.conf file and comment out the
secure listen line, then try a AP2WEBUP at the server console.
If Apache loads we will need to work on the cert errors.
Load TCPCON, Protocol info, TCP, Connections.
You will probably have to hit the tab key to switch from protocol list
to port list.
Look for the following ports and just say yes/no after each, note they
are not necessarily in order:
80
81
389
524
636
2200
2211
8008
8009
--
Timothy Leerhoff
Novell Support Forum Sysop
"I Believe there is more than one way to skin a cat.......
And the cat won't like any of them."
- Jeff Foxworthy
"I believe music hath charms to sooth the savage beast........
but a brick to the head is faster."
- Ron White
|
|
|
|
|