| Asa Whillock 2005-09-28, 5:51 pm |
| Hmm, this is a toughie. I've heard reports from time to time of this
installer not picking up the install location correctly and thus not
getting the components installed. Have you managed to get them
installed correctly previously, or know someone who has? If so it's an
issue of copying them over to your directories for your chosen version
of Flash and you can always do that. The problem being that this is a
more rare problem that hasn't been diagnosed in detail and won't likely
receive a lot of attention until FMS 2 is out. I realize you're in a
hard place, so my best recommendation is to either find an install that
works and copy the files over, or determine from a previous install you
have where those files should be. I'll try and get on this ASAP but I
don't know when that is yet.
Asa
P.S. List, for anyone who has this installed already, can you help
Nathan out here with the files and their locations?
-----Original Message-----
From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Nathan
Chase
Sent: Wednesday, September 28, 2005 11:34 AM
To: FlashComm Mailing List
Subject: RE: [FlashComm] BETA FMS2
Yes. I tried installing that as well, and it seemed to
install something, but i looked in the Components
folders of both my Flash 8 and Flash MX 2004
installations, and saw nothing installed.
Not really sure what to do next. I am basically unable
to author FlashCom/FMS on the Mac right now.
-Nathan
--- Asa Whillock <awhillock-14osZcCZf762oZ/6fjIToQ@public.gmane.org> wrote:
> Did you get the components from the updated
> location. We updated for MX
> 2004
>=20
>
http://www.macromedia.com/support/f...s_updaters.html
>=20
> Asa
>=20
> -----Original Message-----
> From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> [mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On
> Behalf Of Nathan
> Chase
> Sent: Wednesday, September 28, 2005 10:44 AM
> To: FlashComm Mailing List
> Subject: RE: [FlashComm] BETA FMS2
>=20
> I have MX 2004 still installed. But I would rather
> author in Flash 8. If possible.
>=20
> --- Asa Whillock <awhillock-14osZcCZf762oZ/6fjIToQ@public.gmane.org> wrote:
>=20
> On
> for
>
http://www.macromedia.com/cfusion/t...duct=3Dflashcom
>
=3D-----------------------------------------------------------
>
=3D-----------------------------------------------------------
>
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
=3D-----------------------------------------------------------
>
=3D-----------------------------------------------------------
>
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>=20
>=20
>
=3D-----------------------------------------------------------
> Supported by Fig Leaf Software -
> http://www.figleaf.com
>
=3D-----------------------------------------------------------
>=20
> To change your subscription options or search the
> archive:
>
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>=20
>
=3D-----------------------------------------------------------
> Supported by Fig Leaf Software -
> http://www.figleaf.com
>
=3D-----------------------------------------------------------
>=20
> To change your subscription options or search the
> archive:
>
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>=20
=3D-----------------------------------------------------------
Supported by Fig Leaf Software - http://www.figleaf.com
=3D-----------------------------------------------------------
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
=-----------------------------------------------------------
Supported by Fig Leaf Software - http://www.figleaf.com
=-----------------------------------------------------------
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
|