|
Home > Archive > Macromedia Flash Server > March 2006 > edge/origin and webcams
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
edge/origin and webcams
|
|
| Alan Queen 2006-03-17, 2:45 am |
| In an origin/edge setup, am I right in assuming that the origin acts
as a load balancer and the edge servers do most of the work?
If I am, does this apply to webcam streams in addition to pre-recorded flv'=
s?
I'm still trying to determine the setup i need for supporting 1500
simultaneous users all either publishing or subscribing to webcam
streams.
I'm grouping people together in groups of 25-100, where there are 2
publishers and the rest are subscribing.
The real question is do I need to make sure that each group of people
are all connected to the same server to get the right stream or does
the origin/edge help me out here by allowing me to only expose a
single point of entry for all connections? Once again referring to
real time data ( webcams ) and not .flv's.
--
- Alan Queen
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| Mark de Jong 2006-03-17, 7:45 am |
|
Hi Alan,
An Origin acts like a normal FMS2-server for running your application but
uses edges to make it work on multiple servers without a lot of hassle. The
Origin is indeed the single access point for a client at the start of the
connection (and the single point of failure, unfortunatly) and acts like a
load-balancer where the edges do the hard work (streaming) and the Origin is
the direction server for clients and communication between edges regarding
the application. The origin communicates between the edges to make sure
everything is treated right.
For webcam-chats and Edge/Origin is handy (it solves a lot of work that you
would need to do for creating your own kind of load-balancing/clustering
within the application and pushing videostreams to other servers, issues
around shared objects, etc.). For streaming static content it is not as
needed (you could use a normal load-balancer for this).
I would suggest to stresstest your application so you make sure what kind of
hardware and no. of servers is needed.
Kind regards,
Mark de Jong
NetMasters BV
www.netmasters.nl / www.flashhosting.nl
-----Original Message-----
From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Alan Queen
Sent: vrijdag 17 maart 2006 8:36
To: FlashComm Mailing List
Subject: [FlashComm] edge/origin and webcams
In an origin/edge setup, am I right in assuming that the origin acts as a
load balancer and the edge servers do most of the work?
If I am, does this apply to webcam streams in addition to pre-recorded
flv's?
I'm still trying to determine the setup i need for supporting 1500
simultaneous users all either publishing or subscribing to webcam streams.
I'm grouping people together in groups of 25-100, where there are 2
publishers and the rest are subscribing.
The real question is do I need to make sure that each group of people are
all connected to the same server to get the right stream or does the
origin/edge help me out here by allowing me to only expose a single point of
entry for all connections? Once again referring to real time data ( webcams
) and not .flv's.
--
- Alan Queen
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training http://www.figleaf.com
http://training.figleaf.com
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| Thomas Viktil 2006-03-17, 5:45 pm |
| Hi,
I don't intend to hijack this thread, or driving it off-topic, but I'm
doing research on the same topic and I have a question related to
clustered servers.
On a setup like this, would I have to purchase one FMS2 license for each
of the edge-servers? That could eventually turn out to be quite expensive.
Best regards,
Thomas Viktil
Onkel Estrup
www.onkelestrup.no
Mark de Jong wrote:
>
>Hi Alan,
>
>An Origin acts like a normal FMS2-server for running your application but
>uses edges to make it work on multiple servers without a lot of hassle. The
>Origin is indeed the single access point for a client at the start of the
>connection (and the single point of failure, unfortunatly) and acts like a
>load-balancer where the edges do the hard work (streaming) and the Origin is
>the direction server for clients and communication between edges regarding
>the application. The origin communicates between the edges to make sure
>everything is treated right.
>
>For webcam-chats and Edge/Origin is handy (it solves a lot of work that you
>would need to do for creating your own kind of load-balancing/clustering
>within the application and pushing videostreams to other servers, issues
>around shared objects, etc.). For streaming static content it is not as
>needed (you could use a normal load-balancer for this).
>
>I would suggest to stresstest your application so you make sure what kind of
>hardware and no. of servers is needed.
>
>Kind regards,
>
>Mark de Jong
>NetMasters BV
>www.netmasters.nl / www.flashhosting.nl
>
>-----Original Message-----
>From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Alan Queen
>Sent: vrijdag 17 maart 2006 8:36
>To: FlashComm Mailing List
>Subject: [FlashComm] edge/origin and webcams
>
>In an origin/edge setup, am I right in assuming that the origin acts as a
>load balancer and the edge servers do most of the work?
>
>If I am, does this apply to webcam streams in addition to pre-recorded
>flv's?
>
>
>I'm still trying to determine the setup i need for supporting 1500
>simultaneous users all either publishing or subscribing to webcam streams.
>
>I'm grouping people together in groups of 25-100, where there are 2
>publishers and the rest are subscribing.
>
>
>The real question is do I need to make sure that each group of people are
>all connected to the same server to get the right stream or does the
>origin/edge help me out here by allowing me to only expose a single point of
>entry for all connections? Once again referring to real time data ( webcams
> ) and not .flv's.
>
>
>
>--
>- Alan Queen
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training http://www.figleaf.com
>http://training.figleaf.com
>
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training
>http://www.figleaf.com
>http://training.figleaf.com
>
>
>
>
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| Mark de Jong 2006-03-17, 5:45 pm |
| Hi Thomas,
To have load devided you will need at least one origin and one edge. As far
as I know you can use the origin itself as an edge also (meaning that the
origin does both the work as an origin and an edge alltogether). I'm not
sure about this, you might want to check this with Adobe. If that is not
possible you will need at least one origin and 2 edges. Every origin or
edge-server is a new seperate license (where the origin will cost like 4
times an edge). Since an origin server still is the single point of failure
it is not really a cluster, please keep that in mind
If you have good knowlegde about FMS2 Pro and good programming skills (and
time to develop!) you might consider to use FMS2-pro licences instead of
Edge/Origin. It will probably be cheaper however will give you (a lot of)
extra work.
Kind regards,
Mark de Jong
NetMasters BV
www.flashhosting.nl / www.netmasters.nl
-----Original Message-----
From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Thomas Viktil
Sent: vrijdag 17 maart 2006 16:39
To: FlashComm Mailing List
Subject: Re: [FlashComm] edge/origin and webcams
Hi,
I don't intend to hijack this thread, or driving it off-topic, but I'm doing
research on the same topic and I have a question related to clustered
servers.
On a setup like this, would I have to purchase one FMS2 license for each of
the edge-servers? That could eventually turn out to be quite expensive.
Best regards,
Thomas Viktil
Onkel Estrup
www.onkelestrup.no
Mark de Jong wrote:
>
>Hi Alan,
>
>An Origin acts like a normal FMS2-server for running your application but
>uses edges to make it work on multiple servers without a lot of hassle. The
>Origin is indeed the single access point for a client at the start of the
>connection (and the single point of failure, unfortunatly) and acts like a
>load-balancer where the edges do the hard work (streaming) and the Origin
is
>the direction server for clients and communication between edges regarding
>the application. The origin communicates between the edges to make sure
>everything is treated right.
>
>For webcam-chats and Edge/Origin is handy (it solves a lot of work that you
>would need to do for creating your own kind of load-balancing/clustering
>within the application and pushing videostreams to other servers, issues
>around shared objects, etc.). For streaming static content it is not as
>needed (you could use a normal load-balancer for this).
>
>I would suggest to stresstest your application so you make sure what kind
of
>hardware and no. of servers is needed.
>
>Kind regards,
>
>Mark de Jong
>NetMasters BV
>www.netmasters.nl / www.flashhosting.nl
>
>-----Original Message-----
>From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Alan Queen
>Sent: vrijdag 17 maart 2006 8:36
>To: FlashComm Mailing List
>Subject: [FlashComm] edge/origin and webcams
>
>In an origin/edge setup, am I right in assuming that the origin acts as a
>load balancer and the edge servers do most of the work?
>
>If I am, does this apply to webcam streams in addition to pre-recorded
>flv's?
>
>
>I'm still trying to determine the setup i need for supporting 1500
>simultaneous users all either publishing or subscribing to webcam streams.
>
>I'm grouping people together in groups of 25-100, where there are 2
>publishers and the rest are subscribing.
>
>
>The real question is do I need to make sure that each group of people are
>all connected to the same server to get the right stream or does the
>origin/edge help me out here by allowing me to only expose a single point
of
>entry for all connections? Once again referring to real time data ( webcams
> ) and not .flv's.
>
>
>
>--
>- Alan Queen
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training http://www.figleaf.com
>http://training.figleaf.com
>
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training
>http://www.figleaf.com
>http://training.figleaf.com
>
>
>
>
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| James Wrubel 2006-03-17, 5:45 pm |
| Note though that the edge server only works for users who are in the same layer 2 collision domain as the edge server. Edge in this case does not equal what you would expect from an Akamai CDN style service. It is not tied to DNS. As I understand it the E
dge server sends a DHCP-style offer packet to allow users to connect, which means that if there is a router between your users and the edge server, they are unlikely to benefit from the Edge server.
Mark de Jong wrote:
> Hi Thomas,
>
> To have load devided you will need at least one origin and one edge. As far
> as I know you can use the origin itself as an edge also (meaning that the
> origin does both the work as an origin and an edge alltogether). I'm not
> sure about this, you might want to check this with Adobe. If that is not
> possible you will need at least one origin and 2 edges. Every origin or
> edge-server is a new seperate license (where the origin will cost like 4
> times an edge). Since an origin server still is the single point of failure
> it is not really a cluster, please keep that in mind
>
> If you have good knowlegde about FMS2 Pro and good programming skills (and
> time to develop!) you might consider to use FMS2-pro licences instead of
> Edge/Origin. It will probably be cheaper however will give you (a lot of)
> extra work.
>
> Kind regards,
>
> Mark de Jong
> NetMasters BV
> www.flashhosting.nl / www.netmasters.nl
>
> -----Original Message-----
> From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> [mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Thomas Viktil
> Sent: vrijdag 17 maart 2006 16:39
> To: FlashComm Mailing List
> Subject: Re: [FlashComm] edge/origin and webcams
>
> Hi,
>
> I don't intend to hijack this thread, or driving it off-topic, but I'm doing
> research on the same topic and I have a question related to clustered
> servers.
>
> On a setup like this, would I have to purchase one FMS2 license for each of
> the edge-servers? That could eventually turn out to be quite expensive.
>
>
> Best regards,
> Thomas Viktil
>
> Onkel Estrup
> www.onkelestrup.no
>
>
>
> Mark de Jong wrote:
>
> is
> of
> of
>
> ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>
> ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>
>
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| Mark de Jong 2006-03-17, 5:45 pm |
| Extra info: if you do not want to have an origin be the single point of
failure you could setup 2 different origin/edge solutions in 2 different
networks or use 2 origins within the same network. However, this is really
expensive.
Kind regards,
Mark de Jong
NetMasters BV
www.netmasters.nl / www.flashhosting.nl
-----Original Message-----
From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Mark de Jong
Sent: vrijdag 17 maart 2006 17:11
To: thomas-4rRb7GzYz4XkhFJIETvt4g@public.gmane.org; 'FlashComm Mailing List'
Subject: RE: [FlashComm] edge/origin and webcams
Hi Thomas,
To have load devided you will need at least one origin and one edge. As far
as I know you can use the origin itself as an edge also (meaning that the
origin does both the work as an origin and an edge alltogether). I'm not
sure about this, you might want to check this with Adobe. If that is not
possible you will need at least one origin and 2 edges. Every origin or
edge-server is a new seperate license (where the origin will cost like 4
times an edge). Since an origin server still is the single point of failure
it is not really a cluster, please keep that in mind
If you have good knowlegde about FMS2 Pro and good programming skills (and
time to develop!) you might consider to use FMS2-pro licences instead of
Edge/Origin. It will probably be cheaper however will give you (a lot of)
extra work.
Kind regards,
Mark de Jong
NetMasters BV
www.flashhosting.nl / www.netmasters.nl
-----Original Message-----
From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Thomas Viktil
Sent: vrijdag 17 maart 2006 16:39
To: FlashComm Mailing List
Subject: Re: [FlashComm] edge/origin and webcams
Hi,
I don't intend to hijack this thread, or driving it off-topic, but I'm doing
research on the same topic and I have a question related to clustered
servers.
On a setup like this, would I have to purchase one FMS2 license for each of
the edge-servers? That could eventually turn out to be quite expensive.
Best regards,
Thomas Viktil
Onkel Estrup
www.onkelestrup.no
Mark de Jong wrote:
>
>Hi Alan,
>
>An Origin acts like a normal FMS2-server for running your application
>but uses edges to make it work on multiple servers without a lot of
>hassle. The Origin is indeed the single access point for a client at
>the start of the connection (and the single point of failure,
>unfortunatly) and acts like a load-balancer where the edges do the hard
>work (streaming) and the Origin
is
>the direction server for clients and communication between edges
>regarding the application. The origin communicates between the edges to
>make sure everything is treated right.
>
>For webcam-chats and Edge/Origin is handy (it solves a lot of work that
>you would need to do for creating your own kind of
>load-balancing/clustering within the application and pushing
>videostreams to other servers, issues around shared objects, etc.). For
>streaming static content it is not as needed (you could use a normal
load-balancer for this).
>
>I would suggest to stresstest your application so you make sure what
>kind
of
>hardware and no. of servers is needed.
>
>Kind regards,
>
>Mark de Jong
>NetMasters BV
>www.netmasters.nl / www.flashhosting.nl
>
>-----Original Message-----
>From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>[mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Alan
>Queen
>Sent: vrijdag 17 maart 2006 8:36
>To: FlashComm Mailing List
>Subject: [FlashComm] edge/origin and webcams
>
>In an origin/edge setup, am I right in assuming that the origin acts as
>a load balancer and the edge servers do most of the work?
>
>If I am, does this apply to webcam streams in addition to pre-recorded
>flv's?
>
>
>I'm still trying to determine the setup i need for supporting 1500
>simultaneous users all either publishing or subscribing to webcam streams.
>
>I'm grouping people together in groups of 25-100, where there are 2
>publishers and the rest are subscribing.
>
>
>The real question is do I need to make sure that each group of people
>are all connected to the same server to get the right stream or does
>the origin/edge help me out here by allowing me to only expose a single
>point
of
>entry for all connections? Once again referring to real time data (
>webcams
> ) and not .flv's.
>
>
>
>--
>- Alan Queen
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training http://www.figleaf.com
>http://training.figleaf.com
>
> ________________________________________
_______
>FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
>To change your subscription options or search the archive:
>http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
>Brought to you by Fig Leaf Software
>Premier Authorized Adobe Consulting and Training http://www.figleaf.com
>http://training.figleaf.com
>
>
>
>
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training http://www.figleaf.com
http://training.figleaf.com
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training http://www.figleaf.com
http://training.figleaf.com
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
| |
| Mark de Jong 2006-03-17, 5:45 pm |
|
James,
Correct, communitating between edges and origins is done through an
TCP-networkport... Must be in the same network! 
Kind regards,
Mark de Jong
NetMasters BV
www.netmasters.nl / www.flashhosting.nl
-----Original Message-----
From: James Wrubel [mailto:james-zNCL/LQg+xsdnm+yROfE0A@public.gmane.org]
Sent: vrijdag 17 maart 2006 17:23
To: m.dejong-xV3ERUhIFs7Tz9+aGeySBg@public.gmane.org; FlashComm Mailing List
Cc: thomas-4rRb7GzYz4XkhFJIETvt4g@public.gmane.org
Subject: Re: [FlashComm] edge/origin and webcams
Note though that the edge server only works for users who are in the same
layer 2 collision domain as the edge server. Edge in this case does not
equal what you would expect from an Akamai CDN style service. It is not tied
to DNS. As I understand it the Edge server sends a DHCP-style offer packet
to allow users to connect, which means that if there is a router between
your users and the edge server, they are unlikely to benefit from the Edge
server.
Mark de Jong wrote:
> Hi Thomas,
>
> To have load devided you will need at least one origin and one edge.
> As far as I know you can use the origin itself as an edge also
> (meaning that the origin does both the work as an origin and an edge
> alltogether). I'm not sure about this, you might want to check this
> with Adobe. If that is not possible you will need at least one origin
> and 2 edges. Every origin or edge-server is a new seperate license
> (where the origin will cost like 4 times an edge). Since an origin
> server still is the single point of failure it is not really a
> cluster, please keep that in mind
>
> If you have good knowlegde about FMS2 Pro and good programming skills
> (and time to develop!) you might consider to use FMS2-pro licences
> instead of Edge/Origin. It will probably be cheaper however will give
> you (a lot of) extra work.
>
> Kind regards,
>
> Mark de Jong
> NetMasters BV
> www.flashhosting.nl / www.netmasters.nl
>
> -----Original Message-----
> From: flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> [mailto:flashcomm-bounces-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org] On Behalf Of Thomas
> Viktil
> Sent: vrijdag 17 maart 2006 16:39
> To: FlashComm Mailing List
> Subject: Re: [FlashComm] edge/origin and webcams
>
> Hi,
>
> I don't intend to hijack this thread, or driving it off-topic, but I'm
> doing research on the same topic and I have a question related to
> clustered servers.
>
> On a setup like this, would I have to purchase one FMS2 license for
> each of the edge-servers? That could eventually turn out to be quite
expensive.
>
>
> Best regards,
> Thomas Viktil
>
> Onkel Estrup
> www.onkelestrup.no
>
>
>
> Mark de Jong wrote:
>
> is
load-balancer for this).[vbcol=seagreen]
> of
streams.[vbcol=seagreen]
> of
>
> ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com http://training.figleaf.com
>
> ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com http://training.figleaf.com
>
>
________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com
|
|
|
|
|