|
Home > Archive > Voice over IP Cisco > October 2005 > Tandberg T550 Video endpoints
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Tandberg T550 Video endpoints
|
|
| Michael L. Windon 2005-10-04, 2:45 am |
| Anyone using the T550 in there CIPT network?
Does the video endpoints support Point to Point Video calls like the VT
Advantage without a Tandberg MCU?
Do they play well with meeting place?
Sincerely,
Michael L. Windon
"It is possible to store the mind with a million facts and still be entirely
uneducated. "
-Alec Bourne
| |
| Bill Riley III 2005-10-04, 5:45 pm |
| Never used the T550 but I have used the 770 and the 880 and they worked
very well. Depending on what you buy you can set them up as a SCCP
endpoint or a H.323 endpoint. If you get the SCCP endpoint you must
install a patch from Tandberg so the device shows up in CCM. Other than
that you configure both as phones and dial each other just like an
extension and when the other end answers the video comes up.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Michael L.
Windon
Sent: Monday, October 03, 2005 8:56 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Tandberg T550 Video endpoints
Anyone using the T550 in there CIPT network?
Does the video endpoints support Point to Point Video calls like the VT
Advantage without a Tandberg MCU?
Do they play well with meeting place?
Sincerely,
Michael L. Windon
"It is possible to store the mind with a million facts and still be
entirely uneducated. "
-Alec Bourne
| |
| Leetun, Rob 2005-10-04, 5:45 pm |
| I just ran this type of configuration as a SCCP endpoint this past week
with no gliches. Mgmt was quite pleased. The patch from Tanberg will
require a reboot of the Pub. So keep that in mind.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Bill Riley III
Sent: Tuesday, October 04, 2005 7:11 AM
To: Michael L. Windon; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Tandberg T550 Video endpoints
Never used the T550 but I have used the 770 and the 880 and they worked
very well. Depending on what you buy you can set them up as a SCCP
endpoint or a H.323 endpoint. If you get the SCCP endpoint you must
install a patch from Tandberg so the device shows up in CCM. Other than
that you configure both as phones and dial each other just like an
extension and when the other end answers the video comes up.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Michael L.
Windon
Sent: Monday, October 03, 2005 8:56 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Tandberg T550 Video endpoints
Anyone using the T550 in there CIPT network?
Does the video endpoints support Point to Point Video calls like the VT
Advantage without a Tandberg MCU?
Do they play well with meeting place?
Sincerely,
Michael L. Windon
"It is possible to store the mind with a million facts and still be
entirely uneducated. "
-Alec Bourne
|
|
|
|
|