|
Home > Archive > Voice over IP Cisco > October 2005 > Caller ID in SRST
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Jonathan Charles 2005-10-13, 5:50 pm |
| How do you alter CID in SRST mode? We are currently setting outbound CID on
the PRI configuration in CCM. However in fallback, we are sending the
individual DID numbers instead of the main number.
Jonathan
| |
| Erick Bergquist 2005-10-13, 5:50 pm |
| Under the pots dial-peer you can use a
translation-profile to translate the calling party #
to the main number.
--- Jonathan Charles <jonvoip@gmail.com> wrote:
> How do you alter CID in SRST mode? We are currently
> setting outbound CID on
> the PRI configuration in CCM. However in fallback,
> we are sending the
> individual DID numbers instead of the main number.
>
>
> Jonathan
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
| |
| Erick Bergquist 2005-10-24, 9:12 am |
| Here's a sample translation:
voice translation-profile fallback
translate calling 22
translation-rule 22
Rule 1 any 1115551234
router#test translation-rule 22 1234561234
The replaced number: 1115551234
then you can apply that to dial-peers, or under
call-manager-fallback.
call-manager-fallback
translation-profile outgoing fallback
dial-peer voice 10 pots
translation-profile outgoing fallback
--- Jonathan Charles <jonvoip@gmail.com> wrote:
> How do you alter CID in SRST mode? We are currently
> setting outbound CID on
> the PRI configuration in CCM. However in fallback,
> we are sending the
> individual DID numbers instead of the main number.
>
>
> Jonathan
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
|
|
|
|
|