|
Home > Archive > Voice over IP Cisco > November 2005 > BRI
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Voll, Scott 2005-11-22, 5:45 pm |
| Am I under the wrong impression that you could put DID's on a BRI?
Qwest say's they don't do that.
Scott
| |
| Fred Nielsen 2005-11-22, 5:45 pm |
| It can certainly be done from a technical perspective. Some carriers only
offer it as a backup feature however. That is to say: when a BRI
trunk-group is providing a backup path to a PRI trunk-group, where the
primary route path is the PRI group, and often only when served from the
same central office. CLECs are probably more flexible here than ILECs.
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Tuesday, November 22, 2005 9:03 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] BRI
Am I under the wrong impression that you could put DID's on a BRI? Qwest
say's they don't do that.
Scott
| |
| Ortiz, Carlos 2005-11-22, 5:45 pm |
| BRI only has 2 channels that must be programmed. PRI would allow DID service.
--------------------------
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net <cisco-voip-bounces@puck.nether.net>
To: cisco-voip@puck.nether.net <cisco-voip@puck.nether.net>
Sent: Tue Nov 22 12:02:33 2005
Subject: [cisco-voip] BRI
Am I under the wrong impression that you could put DID’s on a BRI? Qwest say’s they don’t do that.
Scott
|
|
|
|
|