|
Home > Archive > Voice over IP Cisco > November 2005 > getting caller ID from T1 cas
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
getting caller ID from T1 cas
|
|
| ajames grace 2005-11-23, 7:45 am |
| how would i get caller ID for my carrier with a t1 cas. below is the controller conifg
controller T1 0/1/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-
i was told by cisco that this is imposible, but this was working at one time
| |
| Ryan Ratliff 2005-11-23, 5:45 pm |
| Found an old doc talking about getting caller id on T1 CAS for AS5x00
routers.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/
products_feature_guide09186a008007fe27.html
I'm pretty sure the same thing is possible with other IOS gateways.
Check out http://www.cisco.com/en/US/tech/tk652/tk653/
technologies_tech_note09186a00800e2560.shtml#ems.
Basically you need E&M fbB to get incoming DNIS.
-Ryan
On Nov 23, 2005, at 12:23 AM, ajames grace wrote:
how would i get caller ID for my carrier with a t1 cas. below is the
controller conifg
controller T1 0/1/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-
i was told by cisco that this is imposible, but this was working at
one time
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|