|
Home > Archive > Voice over IP Cisco > December 2005 > Callback over a Q.SIG
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Callback over a Q.SIG
|
|
| Ruben Montes 2005-12-01, 7:45 am |
| Hello,
Does anybody know if it possible to do a callback between a CCM
4.1(3) and a PBX MD-110 with BC10?
I suppose it may depend on the configuration of the QSIG in the
PBX, am I right?
Thanks,
Ruben
| |
| Teodor Georgiev 2005-12-01, 7:45 am |
|
Correct. In general that is the major advantage of QSIG - a lot of
supplementary services like CNIP, CCBS, CCNA and etc...
MD110 supports both call-back on busy and call-back on no-answer with QSIG
(ECMA) only.
Hint, at the CCM side, set the A/B-numbers to NPI = Unknown or Private,
otherwise the callback might not work! You know, callback is logically to
work only in a closed internal 'phone network' ;)
On Thursday 01 December 2005 14:13, Ruben Montes wrote:
> Hello,
>
>
>
> Does anybody know if it possible to do a callback between a CCM
> 4.1(3) and a PBX MD-110 with BC10?
>
> I suppose it may depend on the configuration of the QSIG in the
> PBX, am I right?
>
>
>
> Thanks,
>
>
>
> Ruben
| |
| Ruben Montes 2005-12-01, 7:45 am |
| Hello,
What do you mean when you say "set the A/B-numbers to NPI = Unknown or
Private"?
How can I set this?
Regards,
Ruben
-----Mensaje original-----
De: Teodor Georgiev [mailto:tgeorgiev@is-bg.net]
Enviado el: jueves, 01 de diciembre de 2005 13:53
Para: cisco-voip@puck.nether.net
CC: Ruben Montes; cisco-voip@puck-nether.net
Asunto: Re: [cisco-voip] Callback over a Q.SIG
Correct. In general that is the major advantage of QSIG - a lot of
supplementary services like CNIP, CCBS, CCNA and etc...
MD110 supports both call-back on busy and call-back on no-answer with
QSIG
(ECMA) only.
Hint, at the CCM side, set the A/B-numbers to NPI = Unknown or Private,
otherwise the callback might not work! You know, callback is logically
to
work only in a closed internal 'phone network' ;)
On Thursday 01 December 2005 14:13, Ruben Montes wrote:
> Hello,
>
>
>
> Does anybody know if it possible to do a callback between a CCM
> 4.1(3) and a PBX MD-110 with BC10?
>
> I suppose it may depend on the configuration of the QSIG in the
> PBX, am I right?
>
>
>
> Thanks,
>
>
>
> Ruben
| |
| Brian Henry 2005-12-01, 7:45 am |
| Did you look at this link?
http://www.cisco.com/en/US/products...080237271.shtml
Brian
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Ruben Montes
Sent: Thu 12/1/2005 7:56 AM
To: tgeorgiev@is-bg.net; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Callback over a Q.SIG
Hello,
What do you mean when you say "set the A/B-numbers to NPI = Unknown or
Private"?
How can I set this?
Regards,
Ruben
-----Mensaje original-----
De: Teodor Georgiev [mailto:tgeorgiev@is-bg.net]
Enviado el: jueves, 01 de diciembre de 2005 13:53
Para: cisco-voip@puck.nether.net
CC: Ruben Montes; cisco-voip@puck-nether.net
Asunto: Re: [cisco-voip] Callback over a Q.SIG
Correct. In general that is the major advantage of QSIG - a lot of
supplementary services like CNIP, CCBS, CCNA and etc...
MD110 supports both call-back on busy and call-back on no-answer with
QSIG
(ECMA) only.
Hint, at the CCM side, set the A/B-numbers to NPI = Unknown or Private,
otherwise the callback might not work! You know, callback is logically
to
work only in a closed internal 'phone network' ;)
On Thursday 01 December 2005 14:13, Ruben Montes wrote:
> Hello,
>
>
>
> Does anybody know if it possible to do a callback between a CCM
> 4.1(3) and a PBX MD-110 with BC10?
>
> I suppose it may depend on the configuration of the QSIG in the
> PBX, am I right?
>
>
>
> Thanks,
>
>
>
> Ruben
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Teodor Georgiev 2005-12-02, 7:45 am |
|
Does he have to?
This page speaks of something different - sending/receiving calling name
(CNIP) in different manners =)
On Thursday 01 December 2005 14:59, Brian Henry wrote:
> Did you look at this link?
> http://www.cisco.com/en/US/products...s_tech_note0918
>6a0080237271.shtml
>
> Brian
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net on behalf of Ruben Montes
> Sent: Thu 12/1/2005 7:56 AM
> To: tgeorgiev@is-bg.net; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] Callback over a Q.SIG
>
>
>
> Hello,
>
> What do you mean when you say "set the A/B-numbers to NPI = Unknown or
> Private"?
> How can I set this?
>
> Regards,
>
> Ruben
> -----Mensaje original-----
> De: Teodor Georgiev [mailto:tgeorgiev@is-bg.net]
> Enviado el: jueves, 01 de diciembre de 2005 13:53
> Para: cisco-voip@puck.nether.net
> CC: Ruben Montes; cisco-voip@puck-nether.net
> Asunto: Re: [cisco-voip] Callback over a Q.SIG
>
>
>
> Correct. In general that is the major advantage of QSIG - a lot of
> supplementary services like CNIP, CCBS, CCNA and etc...
>
> MD110 supports both call-back on busy and call-back on no-answer with
> QSIG
> (ECMA) only.
>
> Hint, at the CCM side, set the A/B-numbers to NPI = Unknown or Private,
> otherwise the callback might not work! You know, callback is logically
> to
> work only in a closed internal 'phone network' ;)
>
> On Thursday 01 December 2005 14:13, Ruben Montes wrote:
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|