|
Home > Archive > Voice over IP Cisco > December 2005 > Caller ID
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Ortiz, Carlos 2005-12-05, 5:45 pm |
| Can someone confirm that caller id is not available on FXO ports? I just
replaced an old Norstar system with a local SRST gateway and FXO ports
but no caller ID is coming through. I thought I have seen a few people
mention that here. If that is the case any prospects that it may become
available in the future?
Carlos Ortiz
Senior Information Technology Specialist
Broward County Office of Information Technology
Data Communications
954-357-7981
cortiz@broward.org
| |
| Davis, Michael 2005-12-05, 5:45 pm |
| Carlos in Broward county - my old stomping grounds (grew up in Davie). :-)
You need an FXO with a "M1" designation for Caller-ID. For example: VIC-4FXO-M1.
DNIS for DID calls, obviously is not supported.
http://www.cisco.com/en/US/products...0080107b55.html
HTH,
Mike
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net on behalf of Ortiz, Carlos
Sent: Mon 12/5/2005 1:22 PM
To: cisco-voip@puck.nether.net
Cc:
Subject: [cisco-voip] Caller ID
Can someone confirm that caller id is not available on FXO ports? I just replaced an old Norstar system with a local SRST gateway and FXO ports but no caller ID is coming through. I thought I have seen a few people mention that here. If that is the cas
e any prospects that it may become available in the future?
Carlos Ortiz
Senior Information Technology Specialist
Broward County Office of Information Technology
Data Communications
954-357-7981
cortiz@broward.org
| |
| Philip Walenta 2005-12-05, 5:45 pm |
| Additionally, you must run H.323, Caller ID on FXO is not supported with
MGCP.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Davis, Michael
Sent: Monday, December 05, 2005 1:53 PM
To: Ortiz, Carlos; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] Caller ID
Carlos in Broward county - my old stomping grounds (grew up in Davie). :-)
You need an FXO with a "M1" designation for Caller-ID. For example:
VIC-4FXO-M1.
DNIS for DID calls, obviously is not supported.
http://www.cisco.com/en/US/products...s_data_sheet091
86a0080107b55.html
HTH,
Mike
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net on behalf of Ortiz, Carlos
Sent: Mon 12/5/2005 1:22 PM
To: cisco-voip@puck.nether.net
Cc:
Subject: [cisco-voip] Caller ID
Can someone confirm that caller id is not available on FXO ports? I
just replaced an old Norstar system with a local SRST gateway and FXO ports
but no caller ID is coming through. I thought I have seen a few people
mention that here. If that is the case any prospects that it may become
available in the future?
Carlos Ortiz
Senior Information Technology Specialist
Broward County Office of Information Technology
Data Communications
954-357-7981
cortiz@broward.org
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|