|
Home > Archive > Voice over IP Cisco > December 2005 > Dial peer usage on H323 g/w
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Dial peer usage on H323 g/w
|
|
| DeRooy, Aaron H 2005-12-23, 5:45 pm |
| Anybody know a quick way to monitor dial peers? I want to clean up my
h323 g/w and it would be nice to know which dial peers get used and
which never get used. There must me an easy way to figure this out
without tracking individual calls using debug and/or show commands.
Thanks,
Aaron
| |
| Fretz, EA Eric @ IS 2005-12-23, 5:45 pm |
| You might look at some of the DIAL-CONTROL mibs available on your router.
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of DeRooy, Aaron H
Sent: Friday, December 23, 2005 9:29 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Dial peer usage on H323 g/w
Anybody know a quick way to monitor dial peers? I want to clean up my h323
g/w and it would be nice to know which dial peers get used and which never
get used. There must me an easy way to figure this out without tracking
individual calls using debug and/or show commands. Thanks,
Aaron
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Erick Bergquist 2005-12-24, 2:45 am |
| Hi,
You could also do a 'show dial-peer voice | inc
tag|Calls|Connect Time' and this will output the
dial-peer id (tag) and number of calls attempted,
successful, failed, etc and total time calls have been
connected using that dial-peer since counters were
cleared or router was rebooted.
--- "Fretz, EA Eric @ IS" <Eric.A.Fretz@L-3com.com>
wrote:
> You might look at some of the DIAL-CONTROL mibs
> available on your router.
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On
> Behalf Of DeRooy, Aaron H
> Sent: Friday, December 23, 2005 9:29 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Dial peer usage on H323 g/w
>
>
> Anybody know a quick way to monitor dial peers? I
> want to clean up my h323
> g/w and it would be nice to know which dial peers
> get used and which never
> get used. There must me an easy way to figure this
> out without tracking
> individual calls using debug and/or show commands.
> Thanks,
>
> Aaron
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
__________________________________
Yahoo! for Good - Make a difference this year.
http://brand.yahoo.com/cybergivingweek2005/
|
|
|
|
|