|
Home > Archive > Voice over IP Cisco > December 2005 > config p2p on my voice gw
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
config p2p on my voice gw
|
|
| James Grace 2005-12-28, 5:46 pm |
| On my gw im trying to config the line code and framing with ser- mod
XXXX
But they wont show up under the serial int. Im trying a add the cmd under
the serial interface. Because this is not a VWIC card. Can someone tell me
what am I missing
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| Voll, Scott 2005-12-28, 5:46 pm |
| Interface configuration
Service-module t1 <framing> or <linecode>
In newer IOS is doesn't show up in the config.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, December 28, 2005 10:39 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] config p2p on my voice gw
On my gw im trying to config the line code and framing with ser- mod
XXXX
But they wont show up under the serial int. Im trying a add the cmd
under the serial interface. Because this is not a VWIC card. Can
someone tell me what am I missing
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| Kevin Thorngren 2005-12-28, 5:46 pm |
| Still not sure what type of card you have. Try using "show inventory"
to get the part number. If you have WIC-1DSU-T1 then take a look at
this web page and use the service-module command:
http://www.cisco.com/en/US/products/hw/modules/ps3129/
products_tech_note09186a00800b1501.shtml
If you have something like the WIC-2T or WIC-1T then you will need an
external CSU/DSU and a V.35 cable. You will then configure the CSU/DSU
with the Line Coding and Framing.
http://www.cisco.com/en/US/products/hw/routers/ps274/
products_tech_note09186a00800b0858.shtml
HTH,
Kevin
On Dec 28, 2005, at 1:38 PM, James Grace wrote:
> On my gw im trying to config the line code and framing___ with ser-
> mod_ XXXX
> But they wont show up under the serial int._ Im trying a add the cmd
> under the serial interface._ Because this is not a VWIC card._ Can
> someone tell me what am I missing
> _
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
> _
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Erick Bergquist 2005-12-28, 5:46 pm |
| The commands won't show up in the config if the
default options are used which is probably the case if
you're in the US and are using all 24 channels. =
A 'show service-module' will tell you details on how
it is currently running and give framing, lining,
clocking, clock speed, errors if any, alarms if any,
etc. =
--- Kevin Thorngren <kthorngr@cisco.com> wrote:
> Still not sure what type of card you have. Try
> using "show inventory" =
> to get the part number. If you have WIC-1DSU-T1
> then take a look at =
> this web page and use the service-module command:
>
http://www.cisco.com/en/US/products/hw/modules/ps3129/
> =
> products_tech_note09186a00800b1501.shtml
> =
> If you have something like the WIC-2T or WIC-1T then
> you will need an =
> external CSU/DSU and a V.35 cable. You will then
> configure the CSU/DSU =
> with the Line Coding and Framing.
>
http://www.cisco.com/en/US/products/hw/routers/ps274/
> =
> products_tech_note09186a00800b0858.shtml
> =
> HTH,
> Kevin
> =
> On Dec 28, 2005, at 1:38 PM, James Grace wrote:
> =
> framing=EF=BF=BD=EF=BF=BD=EF=BF=BD with ser- =
> trying a add the cmd =
a[vbcol=seagreen]
> VWIC card.=EF=BF=BD Can =
> https://puck.nether.net/mailman/listinfo/cisco-voip
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> =
=
________________________________________
__ =
Yahoo! DSL =96 Something to write home about. =
Just $16.99/mo. or less. =
dsl.yahoo.com =
|
|
|
|
|