|
Home > Archive > Voice over IP Cisco > December 2005 > Re: Re: cisco-voip Digest, Vol 34, Issue 96
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Re: Re: cisco-voip Digest, Vol 34, Issue 96
|
|
| Wes Sisk 2005-12-29, 5:46 pm |
| Carlos,
This config is convered in the Video with callmanager SRND:
http://www.cisco.com/go/srnd
/Wes
On Dec 19, 2005, at 10:29 AM, Ortiz, Carlos wrote:
Steve,
Would you mind pointing me out to the documentation you used for this
setup? Specifically the Gatekeeper and MCU setup. We are not doing
this yet, but I can see it on the roadmap.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
bounces@puck.nether.net] On Behalf Of Steve G
Sent: Monday, December 19, 2005 10:10 AM
To: cisco-voip@puck.nether.net; it@cimgroup.com
Subject: [cisco-voip] Re: cisco-voip Digest, Vol 34, Issue 96
Avidan,
I am planning a slightly larger setup using the 3544 chassis
with the 2PRI gateway blade. I have 12 videoconferencing systems
spread out over our WAN. 90 percent of them are Polycom VSX7000
models. I have heard the Tandbergs will integrate pretty seemlessly
with CallManager, but I do not have any experience using them. I
have setup a gatekeeper which allows the H.323 Video endpoints
(Polycom stuff) to call Skinny endpoints (Cisco VTA, 7985...etc).
It's a pretty slick setup and not too complicated to set-up, as long
as you have control over the CCM and gatekeepers. The most difficult
part might be coordinating with other groups if that is required.
We are also looking at the MCU blade for the 3540 chassis.
Steve
---------- Forwarded message ----------
From: "IT" <it@cimgroup.com >
To: <cisco-voip@puck.nether.net>
Date: Sun, 18 Dec 2005 18:34:54 -0800
Subject: [cisco-voip] Video conf. equipment for IP/VC
I am planning to setup a 3511 IP/VC to handle 4 branch offices and
their video conference needs. I currently have a Polycom Viewstation
EX, but with the upcoming IP/VC installation, I didnt know if buying
3 more of those was the right idea. What is everyone using out there
for video conferencing with their IP/VC? Tandbergs? Polycoms? Does
getting MeetingPlace really help in small conferences?
thanks for the advice.
avidan
****************************************
**************
This email may contain trade secrets and/or other information that is
proprietary and/or confidential. Use of this by anyone other than the
intended recipient(s) is prohibited and may be unlawful. If you are not
the intended recipient, delete the e-mail and notify us immediately.
****************************************
**************
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|