| Marcin Nowacki 2005-05-30, 5:45 pm |
| Sorry , I was wrong it should be added to voip dial-peers :
voice class codec 100
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729br8
codec preference 4 g729r8
dial-peer voice 1 voip
destination-pattern [478]..
voice-class codec 100
session target ipv4:10.1.5.254
dtmf-relay h245-alphanumeric
no vad
Marcin
________________________________
From: Tamer Mohamed Bayomy [mailto:tamer.bayomy@xceedcc.com]
Sent: Monday, May 30, 2005 3:10 PM
To: Marcin Nowacki
Cc: cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] IP phone to CCM to GW to PSTN (one ring then
busy tone)
Thanks Marcin, but how I can add codec class command to [Dial peer pots
or Voice-port] the GW will not accept it..!!!
________________________________
From: Marcin Nowacki [mailto:Marcin_Nowacki@sevenet.pl]
Sent: Monday, May 30, 2005 12:30 PM
To: Tamer Mohamed Bayomy; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] IP phone to CCM to GW to PSTN (one ring then
busy tone)
This is codec mismatch , try to add codec class to the PSTN port on GW.
Marcin
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Tamer Mohamed
Bayomy
Sent: Monday, May 30, 2005 7:17 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] IP phone to CCM to GW to PSTN (one ring then busy
tone)
Dear All,
Kindly I need help as I'm having very weird problem which is as follows:
At Site 1:
We have IP Phones registered in Site 1 CCM,
At Site 2:
We have cisco voice gateway which can dial to the PSTN
The problem:
When I dial from the IP phones any number behind Site 2 PSTN the call
rings only one time and then send me busy tone.
This case is casing business pain and I can not find any clue, I need
help..
Regards..
|