| Karim Abdelmonem 2005-06-19, 5:45 pm |
|
Take into consideration that I am not using CM. I am using centralized SIP
server to do call routing for number of enterprises.
My config. is much similar to the info. stated in the following link but
there is nothing stated about CAC as the topology used in the link is using
CM which is not used in my case.
http://www.cisco.com/en/US/tech/tk6...080101210.shtml
Is there a way to add CAC functions with the LLQ, LFI and MLPPP used in the
above link?????
Karim.
>From: "Karim" <karim_abd@hotmail.com>
>To: <cisco-voip@puck.nether.net>, <cisco-nsp@puck.nether.net>
>Subject: [c-nsp] QoS for VOIP.
>Date: Sun, 19 Jun 2005 20:34:38 +0300
>
>Hello,
>
>I am trying to do QoS for VOIP traffic. Successfully configured LLQ, LFI
>and cRTP with MLPPP over virtual-template.
>
>What I am trying to do now is limiting the number of calls according to the
>bandwidth reserved for voice traffic. Can anyone help???
>
>With the current situation, if the reserved bandwidth can give 4 calls with
>good quality (taking into consideration that the rest of the bandwidth is
>consumed for other types of traffic), the 5th call can be started but with
>very bad quality. I am asking how can I avoid this 5th call from the
>begining??? I didn't find CAC config. with LLQ.
>
>
>
>Karim.
>
>
>
> ________________________________________
_______
>cisco-nsp mailing list cisco-nsp@puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
|