|
Home > Archive > Voice over IP Cisco > June 2005 > translation rule - MGCP
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
translation rule - MGCP
|
|
| Marcin Nowacki 2005-06-23, 7:45 am |
| Hello
I would like to add translation rule to incoming numbers , I have CCM
4.1(3) with MGCP Gateway.
Normally ( with H.323 configuration ) I would add it as
incoming translation rule to incoming E1 port but how to configure it
when we have MGCP configured. I would like to add rule as below:
translation-rule 1
Rule 1 ^89 0
Rule 2 ^1 001
Rule 3 ^2 002
Rule 4 ^3 003
Rule 5 ^4 004
Rule 6 ^5 005
Rule 7 ^6 006
Rule 8 ^7 007
Rule 9 ^9 009
Where should I add it . Can it be configured somewhere on Call Manager ?
Greetings Marcin
| |
| Ryan Ratliff 2005-06-23, 7:45 am |
| You'll have to use translation patterns on the CM.
-Ryan
On Jun 23, 2005, at 6:49 AM, Marcin Nowacki wrote:
Hello
I would like to add translation rule to incoming numbers , I have CCM =
4.1(3) with MGCP Gateway.
=A0=A0=A0=A0=A0=A0=A0=A0 Normally ( with H.323 configuration )=A0 I would a=
dd it as =
incoming translation rule to incoming E1 port but how to configure it =
when we have MGCP configured. I would like to add rule as below:
translation-rule 1
=A0Rule 1 ^89 0
=A0Rule 2 ^1 001
=A0Rule 3 ^2 002
=A0Rule 4 ^3 003
=A0Rule 5 ^4 004
=A0Rule 6 ^5 005
=A0Rule 7 ^6 006
=A0Rule 8 ^7 007
=A0Rule 9 ^9=A0009
Where should I add it . Can it be configured somewhere on Call Manager ?
Greetings Marcin
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Marcin Nowacki 2005-06-23, 7:45 am |
| I've always used translation patterns to change outgoing calls ( eg. Add pr=
efix ). It will work with incoming numbers ? =
Marcin
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com] =
Sent: Thursday, June 23, 2005 2:16 PM
To: Marcin Nowacki
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] translation rule - MGCP
You'll have to use translation patterns on the CM.
-Ryan
On Jun 23, 2005, at 6:49 AM, Marcin Nowacki wrote:
Hello
I would like to add translation rule to incoming numbers , I have CCM =
4.1(3) with MGCP Gateway.
=A0=A0=A0=A0=A0=A0=A0=A0 Normally ( with H.323 configuration )=A0 I would a=
dd it as =
incoming translation rule to incoming E1 port but how to configure it =
when we have MGCP configured. I would like to add rule as below:
translation-rule 1
=A0Rule 1 ^89 0
=A0Rule 2 ^1 001
=A0Rule 3 ^2 002
=A0Rule 4 ^3 003
=A0Rule 5 ^4 004
=A0Rule 6 ^5 005
=A0Rule 7 ^6 006
=A0Rule 8 ^7 007
=A0Rule 9 ^9=A0009
Where should I add it . Can it be configured somewhere on Call Manager ?
Greetings Marcin
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ryan Ratliff 2005-06-23, 7:45 am |
| It will work on any call to the destination specified in the =
translation rule. If your calls come into the gateway as 4-digit =
numbers that match your internal extensions exactly then calls made =
from IP phones may hit the same translation patterns that calls from =
the gateway do. Constructive use of partitions/CSS can avoid this.
-Ryan
On Jun 23, 2005, at 8:33 AM, Marcin Nowacki wrote:
I've always used translation patterns to change outgoing calls ( eg. =
Add prefix ). It will work with incoming numbers ?
Marcin
-----Original Message-----
From: Ryan Ratliff [mailto:rratliff@cisco.com]
Sent: Thursday, June 23, 2005 2:16 PM
To: Marcin Nowacki
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] translation rule - MGCP
You'll have to use translation patterns on the CM.
-Ryan
On Jun 23, 2005, at 6:49 AM, Marcin Nowacki wrote:
Hello
I would like to add translation rule to incoming numbers , I have CCM
4.1(3) with MGCP Gateway.
=A0=A0=A0=A0=A0=A0=A0=A0 Normally ( with H.323 configuration )=A0 I would a=
dd it as
incoming translation rule to incoming E1 port but how to configure it
when we have MGCP configured. I would like to add rule as below:
translation-rule 1
=A0Rule 1 ^89 0
=A0Rule 2 ^1 001
=A0Rule 3 ^2 002
=A0Rule 4 ^3 003
=A0Rule 5 ^4 004
=A0Rule 6 ^5 005
=A0Rule 7 ^6 006
=A0Rule 8 ^7 007
=A0Rule 9 ^9=A0009
Where should I add it . Can it be configured somewhere on Call Manager ?
Greetings Marcin
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|