Voice over IP Cisco - RE: Reducing number of rings on inbound calls

This is Interesting: Free IT Magazines  
Home > Archive > Voice over IP Cisco > July 2005 > RE: Reducing number of rings on inbound calls





You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author RE: Reducing number of rings on inbound calls
Erick Bergquist

2005-07-25, 5:45 pm

Ok, taking caller-id enable off fixed things up.
Thanks.

--- Erick Bergquist <erickbe@yahoo.com> wrote:

>
> Yea, that was setup. Thanks. Will see if it has a
> impact. should reduce the ring by one or two
> hopefully.
> Will do debugs if still the same after called id is
> disabled.
>
> --- Wes Sisk <wsisk@cisco.com> wrote:
>
> Behalf
> rings
> ring.
> phone
> to
> customer
> 6
> ________________________________________
____________
> page
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> ________________________________________
____________
> Start your day with Yahoo! - make it your home page
> http://www.yahoo.com/r/hs
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>





________________________________________
____________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
Sponsored Links






Free braindumps | Software forum | Database administration forum

Copyright 2003 - 2008 webservertalk.com