| Kevin Thorngren 2005-09-15, 7:45 am |
| One more thing to check - make sure the dial peers (10.10.10.1 and .2)
match the CallManager Group assigned to the GW.
On Sep 15, 2005, at 8:12 AM, Kevin Thorngren wrote:
> It is difficult to tell what is happening with just the debug. The
> traffic might not be going out the desired interface but it seems that
> it is reaching the CCM. The first thing the H.323 GW is going to do
> is establish a TCP connection with the CCM via a three way handshake.
> I don't remember the sequence of events when a CCM does not recognize
> the H.323 GW but I believe the three way handshake will work then the
> CCM will send a TCP RST. This could be the sequence below. A packet
> capture will show more.
>
> As Phil stated try reseting the GW from CCMAdmin to update the config
> on the CCM side.
>
> Do you have other H.323 GW's working with 10.10.10.1 and 10.10.10.2?
>
> What is the version of CCM you are running, include the SR or ES?
>
> Kevin
>
> On Sep 15, 2005, at 12:52 AM, Walenta, Phil wrote:
>
>
|