|
Home > Archive > Voice over IP Cisco > January 2006 > MGCP fails to start after reload
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
MGCP fails to start after reload
|
|
| Jonathan Charles 2005-12-15, 5:45 pm |
| Have a 2620XM, 12.3.7T, router took a power hit, afterwards MGCP would not
come up until a no mgcp, mgcp had been entered.
I have advised customer to upgrade to 12.3.11T7, but he wants documentation
of bug first.
Checked the bug toolkit, nothing specific is popping up.
Any ideas?
| |
| Wes Sisk 2006-01-09, 9:03 pm |
| Sounds like the old issue where h323 dial-peer appears first in
config, but looks like it should be fixed in that version.
CSCeb08888
/Wes
On Dec 15, 2005, at 11:39 AM, Jonathan Charles wrote:
Have a 2620XM, 12.3.7T, router took a power hit, afterwards MGCP
would not come up until a no mgcp, mgcp had been entered.
I have advised customer to upgrade to 12.3.11T7, but he wants
documentation of bug first.
Checked the bug toolkit, nothing specific is popping up.
Any ideas?
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
|
|
|
|
|