|
Home > Archive > Voice over IP Cisco > January 2006 > gw 2811 with sw port module
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
gw 2811 with sw port module
|
|
| James Grace 2006-01-05, 5:46 pm |
| We have a gw with sw port module and we are putting ip phones it the ports.
The port are config as
Int fa 1/0
Sw acc vlan 10
Sw mod trunk
Sw voice vla 20
Now when like this the the pc connected to ip phone port has no ip
connectivity but the ip phone works fine
If I remove the sw mod trunk the pc work fine but they have to be direct
connected to switch module
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| Voll, Scott 2006-01-05, 5:46 pm |
| Is there a switchport mode dynamic command rather then turnk?
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Thursday, January 05, 2006 11:26 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] gw 2811 with sw port module
We have a gw with sw port module and we are putting ip phones it the
ports. The port are config as
Int fa 1/0
Sw acc vlan 10
Sw mod trunk
Sw voice vla 20
Now when like this the the pc connected to ip phone port has no ip
connectivity but the ip phone works fine
If I remove the sw mod trunk the pc work fine but they have to be
direct connected to switch module
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| Kevin Thorngren 2006-01-05, 5:46 pm |
| Looks like you need to add the command:
switchport trunk encapsulation dot1q
Kevin
On Jan 5, 2006, at 2:25 PM, James Grace wrote:
> We have a gw with sw port module and we are putting ip phones it the
> ports._ The port are config as
> Int fa 1/0
> Sw acc vlan 10
> Sw mod trunk
> Sw voice vla 20
> _
> Now when like this the the pc connected to ip phone port has no ip
> connectivity but the ip phone works fine
> If I remove the sw mod trunk__ the pc work fine but they have to be
> direct connected to switch module
> _
> _
> _
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
> _
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| Ryan Ratliff 2006-01-05, 5:46 pm |
| Also make sure you've added vlan 20 to the vlan-database.
-Ryan
On Jan 5, 2006, at 2:52 PM, Kevin Thorngren wrote:
Looks like you need to add the command:
switchport trunk encapsulation dot1q
Kevin
On Jan 5, 2006, at 2:25 PM, James Grace wrote:
> We have a gw with sw port module and we are putting ip phones it
> the ports. The port are config as
> Int fa 1/0
> Sw acc vlan 10
> Sw mod trunk
> Sw voice vla 20
>
> Now when like this the the pc connected to ip phone port has no ip
> connectivity but the ip phone works fine
> If I remove the sw mod trunk the pc work fine but they have to be
> direct connected to switch module
>
>
>
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
| |
| James Grace 2006-01-05, 5:46 pm |
| There is not
_____
From: Voll, Scott [mailto:Scott.Voll@wesd.org]
Sent: Thursday, January 05, 2006 2:34 PM
To: James Grace; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] gw 2811 with sw port module
Is there a switchport mode dynamic command rather then turnk?
Scott
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Thursday, January 05, 2006 11:26 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] gw 2811 with sw port module
We have a gw with sw port module and we are putting ip phones it the ports.
The port are config as
Int fa 1/0
Sw acc vlan 10
Sw mod trunk
Sw voice vla 20
Now when like this the the pc connected to ip phone port has no ip
connectivity but the ip phone works fine
If I remove the sw mod trunk the pc work fine but they have to be direct
connected to switch module
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
|
|
|
|
|