|
Home > Archive > Voice over IP Cisco > January 2006 > cant dial into a modem using an fxs port
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
cant dial into a modem using an fxs port
|
|
| James Grace 2006-01-13, 9:11 pm |
| We are running cm 4.1.3 w/sr 1. we have a 2821 voice gw with a 8 prt fxs
module. The port work except for one issue. We are not able to use these
ports to dial into modems or pbx systems. They dial up... try to establish
connection and then disconnect.
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| Voll, Scott 2006-01-13, 9:11 pm |
| Are they set to fax passthrough? I could see this happening with Fax
Relay.
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, January 11, 2006 2:56 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] cant dial into a modem using an fxs port
We are running cm 4.1.3 w/sr 1. we have a 2821 voice gw with a 8 prt
fxs module. The port work except for one issue. We are not able to use
these ports to dial into modems or pbx systems. They dial up... try to
establish connection and then disconnect.
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
| |
| James Grace 2006-01-13, 9:11 pm |
| I don't see where to check fax passthrough on the fxs configurations live
look on the line and device config page
_____
From: Voll, Scott [mailto:Scott.Voll@wesd.org]
Sent: Wednesday, January 11, 2006 6:13 PM
To: James Grace; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] cant dial into a modem using an fxs port
Are they set to fax passthrough? I could see this happening with Fax Relay.
Scott
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, January 11, 2006 2:56 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] cant dial into a modem using an fxs port
We are running cm 4.1.3 w/sr 1. we have a 2821 voice gw with a 8 prt fxs
module. The port work except for one issue. We are not able to use these
ports to dial into modems or pbx systems. They dial up... try to establish
connection and then disconnect.
James D. Grace
CCNP CCNA MCSE MCDBA
Sr. System Engineer / Professional Svc.
Digitel Corporation
|
|
|
|
|