|
Home > Archive > Voice over IP Cisco > January 2006 > Valid places to configure MOH
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Valid places to configure MOH
|
|
| Tim Reimers 2006-01-27, 8:48 pm |
| hi guys-
What are the valid places to configure MOH?
(in 4.01)
I know it's done on phones and lines on phones--
Is it possible to do this on CSS or Partition, or some other more
'global' setting?
If not, all my phones/lines are set to using "2- All in the Mind"
I'd like to globally switch that to "51- Fixed Audio"
I saw smoeone discussing SQL queries to find route patterns and change
them...
is there a way to use SQL to find and modify all the MOH settings on a
group of phones at one time?
| |
| Timothy Medley 2006-01-27, 8:48 pm |
| The line takes precedence over the Device Pool.
Depending on the version of BAT you have installed,
you can Bulk change a group of phones or all phones
and set the MoH per line and/or Phone back to the
default.
Tim
--- Tim Reimers <tim.reimers@asheville.k12.nc.us>
wrote:
> AH HA!!!
> Dev pool...
>
> _that's_ what I was forgetting.... thanks!
> I'd been looking...
>
> Now if that'll just override the per-phone
> settings....
>
> -----Original Message-----
> From: Timothy Medley [mailto:medley@mac.com]
> Sent: Wednesday, January 25, 2006 9:40 AM
> To: Tim Reimers
> Subject: Re: [cisco-voip] Valid places to configure
> MOH
>
> You can set Music on Hold at the Device Pool, Phone
> and Line. There is
> also a Service Parameter where you can set the
> default MoH choice. The
> Line takes precedence over the phone which takes
> precedence over the
> Device Pool.
>
> In my experience, I ty to set MoH at the Device Pool
> level, it tends to
> be slightly easier to manage.
>
> Tim
>
> --- Tim Reimers <tim.reimers@asheville.k12.nc.us>
> wrote:
>
> some other more
> All in the Mind"
> Audio"
> patterns and change
>
> the MOH settings on a
>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Voll, Scott 2006-01-27, 8:48 pm |
| Tim-
I'm not sure about 4.0 but with 4.1 you can use the bat tool to remove
MoH on both the line and phone. Then you setup the Device pool to be
the global parameter.
Scott
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Tim Reimers
Sent: Wednesday, January 25, 2006 6:23 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Valid places to configure MOH
hi guys-
What are the valid places to configure MOH?
(in 4.01)
I know it's done on phones and lines on phones--
Is it possible to do this on CSS or Partition, or some other more
'global' setting?
If not, all my phones/lines are set to using "2- All in the Mind"
I'd like to globally switch that to "51- Fixed Audio"
I saw smoeone discussing SQL queries to find route patterns and change
them...
is there a way to use SQL to find and modify all the MOH settings on a
group of phones at one time?
|
|
|
|
|