|
Home > Archive > Voice over IP Cisco > January 2006 > Find out which DSPs are physically installed
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Find out which DSPs are physically installed
|
|
| Jonathan Charles 2006-01-27, 8:49 pm |
| I have a cust trying to build a replacement VG200 (to swap out a failing
one), but we don't know what DSPs are installed in the one we are replacing..
A show diag gave wonky results (saying that there are possibly PVDM-20s).
Is there a command that will tell us at least how many PVDMs are in there?
Jonathan
| |
| Philip Walenta 2006-01-27, 8:49 pm |
| Could you post the output of your "show diag"?
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jonathan Charles
Sent: Thursday, January 26, 2006 10:19 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Find out which DSPs are physically installed
I have a cust trying to build a replacement VG200 (to swap out a failing
one), but we don't know what DSPs are installed in the one we are replacing.
A show diag gave wonky results (saying that there are possibly PVDM-20s).
Is there a command that will tell us at least how many PVDMs are in there?
Jonathan
| |
| Jonathan Charles 2006-01-27, 8:49 pm |
| Slot 0: VG200 Mainboard
Slot 1: NM-HDV (possibly PVDM-12(s) onboard -- please check)
Slot 0: (no part number found)
Slot Daughter Card: VWIC-1MFT-T1
On 1/26/06, Philip Walenta <pwalenta@wi.rr.com> wrote:
>
> Could you post the output of your "show diag"?
>
> ------------------------------
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *Jonathan Charles
> *Sent:* Thursday, January 26, 2006 10:19 AM
> *To:* cisco-voip@puck.nether.net
> *Subject:* [cisco-voip] Find out which DSPs are physically installed
>
> I have a cust trying to build a replacement VG200 (to swap out a failing
> one), but we don't know what DSPs are installed in the one we are replacing.
> A show diag gave wonky results (saying that there are possibly PVDM-20s).
>
> Is there a command that will tell us at least how many PVDMs are in there?
>
>
>
> Jonathan
>
>
| |
| Erick Bergquist 2006-01-27, 8:49 pm |
| router# term mon
router# test dsprm slot# then option 1, at top of
that it will show how many DSPs. Theres 3 DSPs per
PVDM on NM-HDV PVDMs. So if it saids 12 onboard DSPs
then you have 4 PVDMs.
--- Jonathan Charles <jonvoip@gmail.com> wrote:
> Slot 0: VG200 Mainboard
> Slot 1: NM-HDV (possibly PVDM-12(s) onboard --
> please check)
> Slot 0: (no part number found)
> Slot Daughter Card: VWIC-1MFT-T1
>
> On 1/26/06, Philip Walenta <pwalenta@wi.rr.com>
> wrote:
> [mailto:
> *Jonathan Charles
> physically installed
> (to swap out a failing
> the one we are replacing.
> are possibly PVDM-20s).
> many PVDMs are in there?
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
__________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
|
|
|
|
|