|
Home > Archive > Voice over IP Cisco > October 2006 > Jumbo Frames
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| David Fielder \(US\) 2006-10-24, 1:11 pm |
| I have a customer who is converting their 6509's from Hybrid to Native
mode. They are currently using the following config in CatOS:
#module 1 : 2-port 1000BaseX Supervisor
set portjumbo 1/1-2 enable
What is the best way to configure this in IOS?
David Fielder
Senior Engineer
Dimension Data
Office: (336) 510-9431
Mobile: (336) 669-5129
david.fielder@us.didata.com
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
| |
| Jonathan Charles 2006-10-24, 1:11 pm |
| Int range gi1/1 - 2
mtu 9216
Jonathan
On 10/24/06, David Fielder (US) <David.Fielder@us.didata.com> wrote:
>
> I have a customer who is converting their 6509's from Hybrid to Native
> mode. They are currently using the following config in CatOS:
>
>
>
> #module 1 : 2-port 1000BaseX Supervisor
>
> set port jumbo 1/1-2 enable
>
>
>
> What is the best way to configure this in IOS?
>
>
>
>
>
> *David Fielder*
>
> Senior Engineer
>
> Dimension Data
>
> Office: (336) 510-9431
>
> Mobile: (336) 669-5129
>
> david.fielder@us.didata.com
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
| |
| Fedorov, Konstantin 2006-10-25, 7:11 am |
| Hi,
system jumbomtu <value>
or increase mtu on interface
-----------------------
Sincerely Yours,
Konstantin Fedorov
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of David Fielder
(US)
Sent: Tuesday, October 24, 2006 6:58 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Jumbo Frames
I have a customer who is converting their 6509's from Hybrid to Native
mode. They are currently using the following config in CatOS:
#module 1 : 2-port 1000BaseX Supervisor
set port jumbo 1/1-2 enable
What is the best way to configure this in IOS?
David Fielder
Senior Engineer
Dimension Data
Office: (336) 510-9431
Mobile: (336) 669-5129
david.fielder@us.didata.com
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
|
|
|
|
|